Model LC lowpass tee network
Ladders Filters sublibrary of the Physical library
The LC Lowpass Tee block models the LC lowpass tee network described in the block dialog box in terms of its frequency-dependent S-parameters.
For each inductor and capacitor in the network, the block first calculates the ABCD-parameters at each frequency contained in the vector of modeling frequencies. For each series circuit, A = 1, B = Z, C = 0, and D = 1, where Z is the impedance of the series circuit. For each shunt, A = 1, B = 0, C = Y, and D = 1, where Y is the admittance of the shunt circuit.
The LC Lowpass Tee block then cascades the ABCD-parameters for
each circuit element at each of the modeling frequencies, and converts
the cascaded parameters to S-parameters using the RF Toolbox™
See the Output Port block reference page for information about determining the modeling frequencies.
The LC lowpass tee network object is a two-port network as shown in the following circuit diagram.
[L1, L2, L3,
...] is the value of the
'L' property, and [C1,
C2, C3, ...] is the
value of the
Vector containing the inductances, in order from source to load, of all inductors in the network. The inductance vector must contain at least two elements. All values must be strictly positive.
Vector containing the capacitances, in order from source to load, of all capacitors in the network. Its length must be equal to or one less than the length of the vector you provide in the Inductance parameter. All values must be strictly positive.
For information about plotting, see Create Plots.
See the LC Bandpass Pi block for an example of an LC filter.
 Ludwig, Reinhold and Pavel Bretchko, RF Circuit Design: Theory and Applications, Prentice-Hall, 2000.
 Zverev, Anatol I., Handbook of Filter Synthesis, John Wiley & Sons, 1967.