Resize the Motor
By default, the motor dynamometer reference application motor is configured with an 80 kW Flux-Based PMSM motor. Based on desired specifications, you can resize the motor variant for different vehicle applications.
These motor variants are available.
|Motor & Inverter Plant|
Simulate and validate motor system response based on high-level specifications.
Simulate and validate linear dynamic models based on existing motor details.
Flux-Based PMSM (default)
Simulate and validate nonlinear dynamic models based on existing motor details.
To set the variant and resize the motor, use the dynamometer reference application. After you open the reference application, click one of the Resize buttons:
For a mapped motor, click Resize Mapped Motor Model. Then, set the desired maximum power, torque, DC link voltage and constant power speed ratio (CPSR).
For a dynamic motor, click Resize Dynamic PMSM and Recalibrate Controller. Then, set the desired maximum power level, DC link voltage, and axial resize factor.
For a flux-based motor, click Resize Flux-based PMSM and Recalibrate Controller. Then, set the desired maximum power level, DC link voltage, and axial resize factor.
Click Apply and Resize Motor to resize the motor with your desired specifications. The reference application:
Resizes the motor and motor calibration parameters
Recalibrates the controller to match the resized motor
Saves the motor and controller parameters to the model
Click Plot Characteristics to view characteristics of the new motor.
You can use the variants in other applications, for example, in vehicle projects that require a motor model.