Introduction à Communications Toolbox Support Package for RTL-SDR Radio

Concevez et vérifiez des systèmes SDR pratiques avec Communications Toolbox™ Support Package for RTL-SDR Radio. Le support de la radio USB RTL-SDR vous permet de l’utiliser comme périphérique autonome pour recevoir des signaux RF temps réel.

Tutoriels

• Frequency Offset Calibration for Receivers
  

  Measure and calibrate the frequency offset between a transmitter and receiver with options for using captured signals or real-time reception using an RTL-SDR radio.

• Frequency Offset Calibration for Receivers in Simulink
  

  Measure and calibrate the frequency offset between a transmitter and receiver with options for using captured signals or real-time reception using an RTL-SDR radio.

• Spectrum Analysis of Signals
  

  Perform spectral analysis of signals using either recorded data or real-time reception with RTL-SDR, ADALM-PLUTO, or USRP™ radios, tuning to specific bands and utilizing a spectrum analyzer for viewing and measurements.

• Spectrum Analysis of Signals in Simulink
  

  Perform spectral analysis of signals using either recorded data or real-time reception with RTL-SDR, ADALM-PLUTO, or USRP radios, tuning to specific bands and utilizing a spectrum analyzer for viewing and measurements.

• FM Broadcast Receiver in Simulink
  

  Build an FM mono or stereo receiver using recorded data or real-time signals with an RTL-SDR, ADALM-PLUTO, or USRP radio.

• FRS/GMRS Receiver in Simulink
  

  Build a walkie-talkie receiver following the FRS/GMRS standards with CTCSS using simulated, captured, or real signals from a commercial walkie-talkie using an RTL-SDR radio.

• FRS/GMRS Walkie-Talkie Receiver
  

  Build a walkie-talkie receiver following the FRS/GMRS standards with CTCSS using simulated, captured, or real signals from a commercial walkie-talkie using an RTL-SDR radio.

• Signal Reception Using Software-Defined Radios
  

  Tune software-defined radios to receive signals using the SDR Receiver app. (depuis R2025a)