Select pull mode for Pin #
Select pull mode for pins 0–15
Model Configuration Pane: Hardware Implementation / Simulink or Embedded Coder Hardware Support Package / Hardware board settings / Target hardware resources / GPIO A, GPIO B, GBPIO C, GPIO D, GPIO E, GBPIO F, GPIO G, GPIO H, and GBPIO I
Description
The Select pull mode for Pin # parameter defines pull mode that you select for pins 0–15.
Settings
No pull-up or pull-down
(default) |
No pull-up or pull-down
|
Pull-down
The pull mode that you select for pins 0–15.
Recommended Settings
No recommendation.
Programmatic Use
No programmatic use is available. |
Version History
Introduced in R2014b