Main Content

Detect task overruns

Detection of failure to complete execution of current loop within current time step

Model Configuration Pane: Hardware Implementation / Simulink or Embedded Coder Hardware Support Package / Hardware board settings / Operating system/scheduler

Description

The Detect task overruns parameter enables detection of failure to complete execution of the current loop within the current time step.

Dependencies

None

Settings

off (default) | on

When off, overrun detection is disabled.

Examples

expand all

  1. In the Simulink® Editor, select Simulation > Model Configuration Parameters.

  2. In the Configuration Parameters dialog box, click Hardware Implementation.

  3. Set the Hardware board parameter to either:

    • AMD Zynq ZC702 evaluation kit

    • AMD Zynq ZC706 evaluation kit

    • ZedBoard

    Then, click Apply.

    The parameter values under Hardware board settings are automatically populated to their default values.

  4. If you chose AMD Zynq ZC706 evaluation kit or ZedBoard, set the Feature set for selected hardware board to Simulink or Embedded Coder Hardware Support Package and click Apply.

  5. Enable the selection for Detect task overruns and click Apply.

  6. Click OK to close the dialog box.

Recommended Settings

No recommendation.

Programmatic Use

No programmatic use is available.

Version History

Introduced in R2014b