RTL Customization Parameters for RAMs

This page describes parameters that reside in the HDL Code Generation > Global Settings > Coding Style tab of the Configuration Parameters dialog box.

Initialize all RAM blocks

Enable or suppress generation of initial signal value for RAM blocks. If you specify a nonzero initial value for the RAM, this setting is ignored.

Settings

Default: On

On

For RAM blocks, generate initial values of '0' for both the RAM signal and the output temporary signal.

Off

For RAM blocks, do not generate initial values for either the RAM signal or the output temporary signal.

Tip

This parameter applies to these RAM blocks in the HDL Coder > HDL RAMs Block Library in the Simulink Library Browser:

• Dual Port RAM

• Simple Dual Port RAM

• Single Port RAM

• Dual Rate Dual Port RAM

Command-Line Information

Property: InitializeBlockRAM

Type: character vector

Value: 'on' | 'off'

Default: 'on'

To set this property, use the functions hdlset_param or makehdl. To view the property value, use the function hdlget_param.

RAM Architecture

Select RAM architecture with clock enable, or without clock enable, for all RAMs in DUT subsystem.

Settings

Default: RAM with clock enable

Select one of the following options from the menu:

• RAM with clock enable: Generate RAMs with clock enable.

• Generic RAM without clock enable: Generate RAMs without clock enable.

Command-Line Information

Property: RAMArchitecture

Type: character vector

Value: 'WithClockEnable' | 'WithoutClockEnable'

Default: 'WithClockEnable'

To set this property, use the functions hdlset_param or makehdl. To view the property value, use the function hdlget_param.