The Instrument Control Toolbox™ supports the use of instruments and communication via the following interfaces. The table lists the interface support by platform. Notes after the table contain more specific information.
|Feature||64-bit MATLAB on Windows||64-bit MATLAB on Mac OS||64-bit MATLAB on Linux|
|VISA 3||supported 1||supported on two vendors 1, 3|
|GPIB 4||supported 1||supported 1|
|I2C 5||supported 1||supported 1||supported 1|
|SPI 5||supported 1||supported 1||supported 1|
|Quick-Control Oscilloscope, Quick-Control Function Generator, Quick-Control RF Signal Generator||supported 2||supported 2||supported 2|
|MATLAB Instrument Drivers||supported||supported||supported|
|MATLAB Instrument Drivers made using IVI-C drivers and Instrument Wrappers for IVI-C drivers||supported 1|
1. Dependent on support by third-party vendor driver for the hardware on this platform.
2. Dependent on third-party vendor support of platform when using an IVI-driver with Quick-Control Oscilloscope or Quick-Control Function Generator.
3. Requires Keysight™ (formerly Agilent®), National Instruments®, Tektronix®, Rohde and Schwarz R&S VISA, or TAMS VISA compliant with VISA specification 5.0 or higher for any platform. Only National Instruments VISA and Rohde and Schwarz R&S VISA are supported on . The other vendors’ VISA support does not include .
4. Requires Keysight (formerly Agilent), ICS Electronics™, Measurement Computing™ (MCC), ADLINK Technology, or National Instruments hardware and driver.
5. Requires Aardvark or National Instruments hardware and driver.
6. Bluetooth Serial Port Profile only.
See https://www.mathworks.com/hardware-support/instrument-control-software.html for a complete list of supported hardware.