Estimate maximum range, peak power, and SNR of a radar system

The **Radar Equation Calculator** app solves
the basic radar equation for monostatic or bistatic radar systems.
The radar equation relates target range, transmitted power, and received
signal SNR. Using this app, you can:

Solve for maximum target range based on the transmit power of the radar and specified received SNR

Calculate required transmit power based on known target range and specified received SNR

Calculate the received SNR value based on known range and transmit power

MATLAB

^{®}Toolstrip: On the**Apps**tab, under**Signal Processing and Communications**, click the app icon.MATLAB command prompt: Enter

`radarEquationCalculator`

.

`Calculation Type`

— Type of calculation to perform`Target Range`

(default) | `Peak Transmit Power`

| `SNR`

`Target Range`

– solves for
maximum target range based on transmit power of the radar and desired
received SNR.

`Peak Transmit – Power`

computes
power needed to transmit based on known target range and desired received
SNR.

`SNR`

– calculates the received
SNR value based on known range and transmit power.

`Wavelength`

— Wavelength of radar operating frequency0.3 m (default) |

`m`

| `cm`

| `mm`

Specify the wavelength of radar operating frequency in `m`

, `cm`

,
or `mm`

.

The wavelength is the ratio of the wave propagation speed to frequency. For electromagnetic waves, the speed of propagation is the speed of light.

Denoting the speed of light by *c* and the
frequency (in hertz) of the wave by *f*, the equation
for wavelength is:

$$\lambda =\frac{c}{f}$$

`Pulse Width`

— Single pulse duration1 µs (default) |

`µs`

| `ms`

| `s`

Specify the single pulse duration in `µs`

, `ms`

,
or `s`

.

`System Losses`

— System loss in decibels (dB)0 dB (default)

System Losses represents a general loss factor that comprises losses incurred in the system components and in the propagation to and from the target.

`Noise Temperature`

— System noise temperature in kelvins290 K (default)

The system noise temperature is the product of the system temperature and the noise figure.

`Target Radar Cross Section`

— Radar cross section (RCS)`1 m²`

(default) | `m²`

| `dBsm`

Specify the target radar cross section in `m²`

,
or `dBsm`

.

The target radar cross section is nonfluctuating.

`Configuration`

— Type of radar system`Monostatic`

(default) | `Bistatic`

`Monostatic`

– Transmitter and
receiver are colocated (monostatic radar).

`Bistatic`

– Transmitter and
receiver are not colocated (bistatic radar).

`Gain`

— Transmitter and receiver gain in decibels (dB)20 dB (default)

When the transmitter and receiver are colocated (monostatic radar), the transmit and receive gains are equal.

This parameter is enabled only if the **Configuration** is
set to `Monostatic`

.

`Peak Transmit Power`

— Transmitter peak power1 kw (default) |

`kW`

| `mW`

| `W`

| `dBW`

Specify the transmitter peak power in `kW`

, `mW`

, `W`

,
or `dBW`

.

This parameter is enabled only if the **Calculation
Type** is set to `Target Range`

or `SNR`

.

`SNR`

— Minimum output signal-to-noise ratio at the receiver in decibels10 dB (default)

Specify an SNR value, or calculate an SNR value using Detection Specifications for SNR.

You can calculate the SNR required to achieve a particular probability of detection and probability of false alarm using Shnidman's equation. To calculate the SNR value:

Click the arrows to the right of the

**SNR**label to open the Detection Specifications for SNR menu.Enter values for Probability of Detection, Probability of False Alarm, Number of Pulses, and Swerling Case Number.

This parameter is enabled only if the **Calculation
Type** is set to `Target Range`

or ```
Peak
Transmit Power
```

.

`Probability of Detection`

— Detection probability used to estimate SNR0.81029 (default)

Specify the detection probability used to estimate SNR using Shnidman's equation.

This parameter is enabled only when the **Calculation
Type** is set to `Peak Transmit Power`

or ```
Target
Range
```

, and you select the Detection Specifications
for SNR button for the **SNR** parameter.

`Probability of False Alarm`

— False alarm probability used to estimate SNR0.001 (default)

Specify the false-alarm probability used to estimate SNR using Shnidman's equation.

This parameter is enabled only when the **Calculation
Type** is set to `Peak Transmit Power`

or ```
Target
Range
```

, and you select the Detection Specifications
for SNR button for the **SNR** parameter.

`Number of Pulses`

— Number of pulses used to estimate SNR1 (default)

Specify a single pulse, or the number of pulses used for noncoherent integration in Shnidman's equation.

Use multiple pulses to reduce the transmitted power while maintaining the same maximum target range.

This parameter is enabled only when the **Calculation
Type** is set to `Peak Transmit Power`

or ```
Target
Range
```

, and you select the Detection Specifications
for SNR button for the **SNR** parameter.

`Swerling Case Number`

— Swerling case number used to estimate SNR`0`

(default) | `1`

| `2`

| `3`

| `4`

Specify the Swerling case number used to estimate SNR using Shnidman's equation:

– Nonfluctuating pulses.`0`

– Scan-to-scan decorrelation. Rayleigh/exponential PDF–A number of randomly distributed scatterers with no dominant scatterer.`1`

– Pulse-to-pulse decorrelation. Rayleigh/exponential PDF– A number of randomly distributed scatterers with no dominant scatterer.`2`

– Scan-to-scan decorrelation. Chi-square PDF with 4 degrees of freedom. A number of scatterers with one dominant.`3`

– Pulse-to-pulse decorrelation. Chi-square PDF with 4 degrees of freedom. A number of scatterers with one dominant.`4`

Swerling case numbers characterize the detection problem for fluctuating pulses in terms of:

A decorrelation model for the received pulses.

The distribution of scatterers affecting the probability density function (PDF) of the target radar cross section (RCS).

The Swerling case numbers consider all combinations of two decorrelation models (scan-to-scan; pulse-to-pulse) and two RCS PDFs (based on the presence or absence of a dominant scatterer).

**Calculation
Type** is set to `Peak Transmit Power`

or ```
Target
Range
```

, and you select the Detection Specifications
for SNR button for the **SNR** parameter.

`Target Range`

— Range to target10 km (default) |

`km`

| `m`

| `mi`

| `nmi`

Specify target range in `m`

, `km`

, `mi`

,
or `nmi`

.

This parameter is enabled only when the **Calculation
Type** is set to `Peak Transmit Power`

or `SNR`

,
and the **Configuration** is set to `Monostatic`

.

`Transmitter Gain`

— Transmitter gain in decibels (dB)20 dB (default)

When the transmitter and receiver are not colocated (bistatic radar), specify the transmitter gain separately from the receiver gain.

This parameter is enabled only if the **Configuration** is
set to `Bistatic`

.

`Range from Transmitter`

— Range from the transmitter to the target10 km (default) |

`km`

| `m`

| `mi`

| `nmi`

When the transmitter and receiver are not colocated (bistatic radar), specify the transmitter range separately from the receiver range.

You can specify range in `m`

, `km`

, `mi`

,
or `nmi`

.

This parameter is enabled only when the **Calculation
Type** is set to `Peak Transmit Power`

or `SNR`

,
and the **Configuration** is set to `Bistatic`

.

`Receiver Gain`

— Receiver gain in decibels (dB)20 dB (default)

When the transmitter and receiver are not colocated (bistatic radar), specify the receiver gain separately from the transmitter gain.

This parameter is enabled only if the **Configuration** is
set to `Bistatic`

.

`Range from Receiver`

— Range from the target to the receiver10 km (default) |

`km`

| `m`

| `mi`

| `nmi`

When the transmitter and receiver are not colocated (bistatic radar), specify the receiver range separately from the transmitter range.

You can specify range in `m`

, `km`

, `mi`

,
or `nmi`

.

This parameter is enabled only when the **Calculation
Type** is set to `Peak Transmit Power`

or `SNR`

,
and the **Configuration** is set to `Bistatic`

.