Main Content

Voltage Sensor

Voltage sensor in electrical systems

  • Library:
  • Simscape / Foundation Library / Electrical / Electrical Sensors

    Simscape / Electrical / Sensors & Transducers

  • Voltage Sensor block

Description

The Voltage Sensor block represents an ideal voltage sensor, that is, a device that converts voltage measured between two points of an electrical circuit into a physical signal proportional to the voltage.

Use the + and - ports to connect the sensor in parallel with the block (or several blocks) where you want to measure the voltage. Port V outputs the measurement result as a physical signal. Use a PS-Simulink Converter block to connect this port to Simulink® blocks, such as Scope or Display.

Ports

Output

expand all

Physical signal output port for the voltage measurement.

Conserving

expand all

Electrical conserving port associated with the sensor positive terminal.

Electrical conserving port associated with the sensor negative terminal.

Extended Capabilities

C/C++ Code Generation
Generate C and C++ code using Simulink® Coder™.

Version History

Introduced in R2007a