Flow Rate Sensor (IL)

Measure mass flow rate and volumetric flow rate

Since R2020a

• 

Libraries:
Simscape / Foundation Library / Isothermal Liquid / Sensors

Description

The Flow Rate Sensor (IL) block represents an ideal sensor that measures mass flow rate and volumetric flow rate in an isothermal liquid network. There is no change in pressure or temperature across the sensor.

Because the flow rate is a Through variable, the block must connect in series with the component being measured.

Ports A and B represent the sensor inlet and outlet. The relative orientation of ports A and B establishes the measurement sign. The sign is positive if flow occurs from port A to port B. Switching port connections reverses the measurement sign.

Physical signal ports M and V output the mass flow rate and the volumetric flow rate through the sensor, respectively. The Sensor Measurements parameter controls the measurement type by exposing or hiding the respective ports. Connect an exposed physical signal port to a PS-Simulink Converter block to transform the output physical signal into a Simulink^® signal, for example, for plotting or additional data processing.

The block icon changes depending on the value of the Sensor Measurements parameter.

Sensor Measurements	Block Icon
Mass flow rate
Volumetric flow rate
Mass and volumetric flow rates

If the sensor measurements include volumetric flow rate, the block calculates it from the measured mass flow rate:

$$q=\frac{\dot{m}}{\rho }$$

where:

• q is the volumetric flow rate.

• $$\dot{m}$$ is the measured mass flow rate.

• ρ is fluid mixture density at port A or B. There is no pressure difference across the sensor, therefore the densities at ports A and B are identical. Equations used to compute the fluid mixture density depend on the selected isothermal liquid model. For detailed information, see Isothermal Liquid Modeling Options.

Ports

Output

M — Mass flow rate, kg/s

physical signal

Physical signal output port for the mass flow rate measurement.

Dependencies

This port is visible if you set the Sensor Measurements parameter to Mass flow rate or Mass and volumetric flow rate.

V — Volumetric flow rate, m^3/s

physical signal

Physical signal output port for the volumetric flow rate measurement.

Dependencies

This port is visible if you set the Sensor Measurements parameter to Volumetric flow rate or Mass and volumetric flow rate.

Conserving

A — Sensor inlet

isothermal liquid

Isothermal liquid conserving port. Flow rate is positive if fluid flows from port A to port B.

B — Sensor outlet

isothermal liquid

Isothermal liquid conserving port. Flow rate is positive if fluid flows from port A to port B.

Parameters

Sensor Measurements — Select whether the sensor measures mass flow rate, volumetric flow rate, or both

Mass flow rate (default) | Volumetric flow rate | Mass and volumetric flow rate

Select the type of measurements:

• Mass flow rate — The sensors measures the mass flow rate. Selecting this option exposes the output port M.

• Volumetric flow rate — The sensors measures the volumetric flow rate. Selecting this option exposes the output port V.

• Mass and volumetric flow rate — The sensors measures both the mass flow rate and the volumetric flow rate. Selecting this option exposes the output ports M and V.

Extended Capabilities

C/C++ Code Generation
Generate C and C++ code using Simulink® Coder™.

Version History

Introduced in R2020a