XY Graph

Display X-Y plot of signals using MATLAB figure window

  • Library:
  • Simulink / Sinks

    HDL Coder / Sinks

Description

The XY Graph block displays an X-Y plot of its inputs in a MATLAB® figure window.

The block has two scalar inputs. The block plots data from the first input (the x direction) against data from the second input (the y direction). (See Port Location After Rotating or Flipping for a description of the port order for various block orientations.) This block is useful for examining limit cycles and other two-state data. Data outside the specified range does not appear.

A figure window appears for each XY Graph block in the model at the start of simulation.

Note

The XY Graph block does not support stepping back in a simulation.

Ports

Input

expand all

Plot input as x values on an X-Y plot. See Port Location After Rotating or Flipping for a description of the port order for various block orientations.

Data Types: single | double | int8 | int16 | int32 | uint8 | uint16 | uint32 | Boolean | fixed point

Plot input as y values on an X-Y plot. See Port Location After Rotating or Flipping for a description of the port order for various block orientations.

Data Types: single | double | int8 | int16 | int32 | uint8 | uint16 | uint32 | Boolean | fixed point

Parameters

expand all

Specify the minimum x-axis value. Data below the minimum x is ignored.

Programmatic Use

Block Parameter: xmin
Type: character vector
Values: real number
Default: '-1'

Specify the maximum x-axis value. Data above the maximum x is ignored.

Programmatic Use

Block Parameter: xmax
Type: character vector
Values: real number
Default: '1'

Specify the minimum y-axis value. Data below the minimum y is ignored.

Programmatic Use

Block Parameter: ymin
Type: character vector
Values: real number
Default: '-1'

Specify the maximum y-axis value. Data above the maximum y is ignored.

Programmatic Use

Block Parameter: ymax
Type: character vector
Values: real number
Default: '1'

Specify the time interval between samples. To inherit the sample time, set this parameter to -1. For more information, see Specify Sample Time.

Programmatic Use

Block Parameter: st
Type: character vector
Values: '-1' (for inherited) | positive number
Default: '-1'

Block Characteristics

Data Types

Boolean | double | enumerated | fixed point | integer | single

Direct Feedthrough

no

Multidimensional Signals

no

Variable-Size Signals

no

Zero-Crossing Detection

no

Extended Capabilities

Introduced before R2006a