Configure Holding registers

R2026b

Configure holding register parameters

Model Configuration Pane: Hardware Implementation / Hardware board settings / Target hardware resources / Modbus properties

Description

Select this parameter to configure the starting address and the number of holding registers.

Dependencies

To enable this property, In the Configuration Parameters dialog box, set Hardware board to one of these boards and set Mode to Server.

  • Arduino® MKR Zero

  • Arduino Mega 2560

  • Arduino Mega ADK

  • Arduino MKR 1000

  • Arduino MKR WIFI 1010

  • Arduino Leonardo

  • Arduino Micro

  • Arduino Nano 3.0

  • Arduino Nano 33 IoT

  • Arduino Uno

  • Arduino Robot Control board

  • Arduino Robot Motor board

Settings

on (default) | off

Holding Register Parameters

ParameterDescriptionDefault Value

Start address

Starting address of the holding register

Dependencies: To enable this parameter, select Configure Holding registers.

0
Quantity

Number of holding registers

Dependencies: To enable this parameter, select Configure Holding registers.

1

Programmatic Use

No programmatic use is available.

Version History

Introduced in R2020b