Check block orientation

Check ID: mathworks.jmaab.jc_0110

Guideline: jc_0110: Direction of block

• MAB v5.0

• JMAAB v5.1

• JMAAB v6.0

Description

Checks blocks with changed orientation.

Identifies the blocks that are reversed or with rotated orientation. This check excludes Unit Delay and Delay blocks.

This check requires a Simulink^® Check™ and Stateflow^® license.

Check Parameterization

This check does not include sub-checks because the MAB modeling guideline provides only one sub ID.

For reference, the MAB guideline sub ID(s) that are recommended for use by the NA-MAAB and JMAAB modeling standards organizations are:

• NA-MAAB — No recommendations

• JMAAB — a

Results and Recommended Actions

Condition	Recommended Action
Some blocks in the model have rotated or reversed orientation.	Flip or rotate these blocks to be oriented toward the right.

Capabilities and Limitations

• Runs on library models.

• Analyzes content of library-linked blocks. By default, the input parameter Follow links is set to on.

• Analyzes content in masked subsystems. By default, the input parameter Look under masks is set to graphical.

• Allows exclusions of blocks and charts.

Edit-Time Checking

This check is supported by edit-time checking.