You can use the Model Advisor to verify that your model or subsystem complies with the MathWorks® Advisory Board (MAB) and Japan MATLAB® Automotive Advisory Board modeling (JMAAB) guidelines.
To open the Model Advisor, in the Simulink® editor, click the Modeling tab and select Model Advisor. A System Selector ― Model Advisor dialog box opens. Select the model or system that you want to review and click OK.
The MAB checks are available from these Model Advisor folders:
By Product > Simulink Check > Modeling Standards > MAB Checks
By Task > Modeling Standards for MAB
The JMAAB checks are available from these Model Advisor folders:
By Product > Simulink Check > Modeling Standards > JMAAB Checks
By Task > Modeling Standards for JMAAB
For information on using the Model Advisor, see Run Model Advisor Checks and Review Results.
This table identifies MathWorks Advisor Board (MAB) guidelines, the corresponding Japan MathWorks Automotive Advisor Board (JMAAB) guidelines, and Model Advisor check that you can use to verify compliance with these guidelines. Additional information in the tables includes:
MAB Modeling Guideline — Links to the MathWorks Advisory Board (MAB) guideline.
Corresponding JMAAB Modeling Guideline — Identifies the JMAAB modelling guideline that corresponds to the MAB guideline. To review the guideline, see Control Algorithm Modeling Guidelines Using MATLAB, Simulink, and Stateflow on the MathWorks website.
Model Advisor Check — Provides links to the Model Advisor check that is used to verify compliance to the modeling guideline.
When applicable, this column clarifies why a guideline does not have a corresponding check:
No check — Indicates that the guideline can be checked by using a Model Advisor check, however, the check does not currently exist.
Not checkable — Indicates that it is not possible to verify compliance to this guideline by using a Model Advisor check.