Power (3ph, Phasor)
Compute three-phase active and reactive powers using three-phase voltage and current phasors
Simscape / Electrical / Specialized Power Systems / Sensors and Measurements
The Power (3ph, Phasor) block outputs total active power P and reactive power Q of a three-phase voltage-current phasor signal pair. P and Q are computed as follows:
Ia*, Ib*, Ic* are the complex conjugates of Ia, Ib, and Ic.
The figure shows sign conventions:
Inputs and Outputs
The three-phase phasor (three complex signals) voltage signal, in volts peak.
The three-phase phasor (three complex signals) current signal, in amperes peak.
Returns the total active power, in watts.
Returns the total active power, in vars.
shows the use of the Power (3ph, Phasor) block.
Introduced in R2013a