Using the DSP System Toolbox™ Array Plot block with the Simulink® Support Package for Apple iOS Devices, you can:
Display the array plot on the device screen when you build, load, and run the model on your mobile device.
Show a real-time display of raw or processed sensor data on your device screen.
Display multiple signals from various sources on a single array plot display.
Include multiple array plot displays to group related data signals.
Match your preferences by customizing the appearance of the array plot.
Create a Simulink model.
In the model, click Simulation > Model Configuration Parameters to open the Configuration Parameters dialog box.
Select the Hardware
Implementation pane, and set the Hardware
board parameter list to
Device. Click OK.
Open the Simulink Library Browser. From the Simulink > Sources library, add a Random Number block to your model.
From the DSP System Toolbox > Statistics library, add a Histogram block to your model.
From the DSP System Toolbox > Sinks library, add a Array Plot block to your model.
In the model, connect the three blocks as shown.
In the Histogram block, set the properties as follows.
Set Lower limit of histogram to
Set Lower limit of histogram to
Set Number of bins ot
Set Find the histogram over to
Check Running histogram.
In the Random Number block, set the Sample time to
0.01. Click OK.
In the model, click Run.
To open the Array Plot viewer and see the histogram of the signal, double-click the Array Plot block. The histogram takes the form of a normal distribution curve.
In the model, click Deploy to Hardware to build the app onto your Apple iOS device.
When the app starts running on your device, you can see the equivalent array plot display on your device screen.
Below the array plot displays, a page indicator widget is automatically generated to show the current array plot selection. Click to the right or left of the page indicator widget to cycle between the available array plot displays.
On the device screen, each array plot display provides a default and a full screen viewing mode. The default view splits the app display into two parts. The left half shows the array plot displays and the right half shows the UI widgets, including the Button, Slider, and Data Display blocks, in your model. The full screen view expands the array plot display to fill the device screen, allowing a more detailed inspection of signals. To toggle between the two views, click the arrow button in the top right corner of the array plot display on your device screen.
On the device screen, you can adjust an array plot display using typical interactive gestures. By tapping and dragging your finger across the screen, you can move the display axes horizontally and vertically. By tapping two fingers on the screen and moving them closer or farther apart, you can zoom in and out of the axes.
To modify the appearance of the array plot in your app, you can use a subset of the style properties available to the scope on your development computer.
To open the Style dialog box from the array plot display box, click View > Style.
For more information on general configuration properties, see the Array Plot block.
The styles of plot used to display the signal:
Select the background color for axes (displays) with the first color palette. Select the ticks, labels, and grid color with the second color palette.
Select the line style, width, and color. The array plot displayed on the app supports continuous, dotted, and dashed line styles only. All other line style selections automatically default to continuous.
All other array plot style parameters use their default value for the array plot display in the app.
You can modify the configuration of the array plot properties in your app by using a subset of the configuration properties available to the array plot on your development computer.
To open the Configuration Properties dialog box, in the scope display box, click View > Configuration properties.
For more information on general configuration properties and their default settings, see the Array Plot block.
Specify the spacing between samples along the x-axis as a finite numeric scalar. The input signal is only y-axis data. X-axis data is set automatically based on both the Sample increment and X-offset values. For example, when X-offset is 0 and Sample increment is 1, the x-data for the input signal is set to 0, 1, 2, 3, 4, … . If you set Sample increment to 0.25, the x-axis data becomes 0, 0.25, 0.5, 0.75, 1, … .
Specify the offset to apply to the x-axis, as a numeric scalar. X-axis data is set automatically based on both the Sample increment and X-offset values. The offset represents the first value on the x-axis. For example, when X-offset is 0 and Sample increment is 1, the x-data for the input signal is set to 0, 1, 2, 3, 4, … . If you set X-offset to -3, the x-axis data becomes -3, -2, -1, 0, 1, … .
Show signal legend. The names listed in the legend are the signal names from the model. For signals with multiple channels, a channel index is appended after the signal name.
Show vertical and horizontal grid lines.
Specify the minimum value of the y-axis, as a real number.
Specify the maximum value of the y-axis, as a real number.
All other array plot configuration parameters use their default values for the array plot in the generated app.
The following limitations apply. These limitations also describe the differences between the array plot behavior while the model is running and when the model builds to the hardware.
After you click Deploy to Hardware to start generating the app, changes
made to the configuration properties of the scope are not automatically applied.
For the array plot configuration properties to take effect in the app, you must
remove the previous generated project. To remove this project, delete the folder
<your model name>_ert_rtw in your working
Layouts or multiple axes within one array plot display are not supported for array plot displays in a generated app.
Array plots are displayed on the app in landscape view only.