This is machine translation

Translated by Microsoft
Mouseover text to see original. Click the button below to return to the English version of the page.

Note: This page has been translated by MathWorks. Click here to see
To view all translated materials including this page, select Country from the country navigator on the bottom of this page.

Deployment

Build the model that loads and runs an executable on the target hardware.

Topics

Build and Run Executable on BeagleBone Black Hardware

Build and run executable on BeagleBone Black hardware

Stop or Restart Executable Running on BeagleBone Black Hardware

Stop or restart an executable running on BeagleBone Black hardware

Run an Executable on Remote BeagleBone Black Hardware

You can configure a model to load and run executables on a remote board using a network connection instead of the supplied USB cable.

Troubleshooting

Detect Run-Time Errors

Detect Run-Time Errors

Get the IP Address of a BeagleBone Black Board

To get the IP address of the BeagleBone Black hardware that the host computer connected to most recently:

Open an SSH Command-Line Session with BeagleBone Black Hardware

Open an SSH Command-Line Session with BeagleBone Black Hardware

Tune and Monitor Executable Running on BeagleBone Black Hardware

Use your host computer to monitor and control an application running on BeagleBone Black hardware