MathWorks Machine Translation
The automated translation of this page is provided by a general purpose third party translator tool.
MathWorks does not warrant, and disclaims all liability for, the accuracy, suitability, or fitness for purpose of the translation.
Use the BeagleBone Black SPI Interface to Connect to a Device
Use the SPI interface on the BeagleBone Black hardware
The BeagleBone Black SPI Interface
SPI interface on the BeagleBone Black hardware
BeagleBone Black Pin Map
Detailed description of BeagleBone Black pin map
Troubleshoot the BeagleBone Black SPI Interface
SPI bus 1 shares pins with HDMI, which is enabled by default.
Use the SPI peripheral on BeagleBone Black® hardware to connect to an MCP3008 10-bit 8-channel ADC.
You clicked a link that corresponds to this MATLAB command:
Run the command by entering it in the MATLAB Command Window.
Web browsers do not support MATLAB commands.
Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: .
You can also select a web site from the following list:
Select the China site (in Chinese or English) for best site performance. Other MathWorks country sites are not optimized for visits from your location.
Contact your local office