Main Content

Connect a Parrot Minidrone to a Windows System Using Bluetooth

The setup procedure for Parrot® in Windows® is divided into 5 parts:

  1. Install Bluetooth Drivers: One-time setup for every PC.

  2. Update the Firmware on Parrot Minidrone: One-time setup for every Parrot hardware (unless the original firmware is restored).

  3. Install RNDIS for Parrot Minidrones: One-time setup for every Parrot hardware (unless the original firmware is restored). Might require reinstallation when the minidrone is reconnected to PC.

  4. Connect to Parrot Mambo Minidrone over Bluetooth: Every time the minidrone is turned off and disconnected from the host PC and needs to be reconnected.

  5. Set Up a Bluetooth NAP Connection and the IP on your System: One-time setup for every PC.