This is machine translation

Translated by Microsoft
Mouseover text to see original. Click the button below to return to the English version of the page.

Note: This page has been translated by MathWorks. Click here to see
To view all translated materials including this page, select Country from the country navigator on the bottom of this page.

Radio I/O

Transmit and receive real-world RF signals

When transmitting or receiving real-world RF signals, use I/O properties and techniques to perform single channel I/O, detect lost samples, apply burst mode buffering , and repeatedly transmit a waveform.


sdrrxCreate receiver System object for radio hardware
sdrtxCreate transmitter System object for radio hardware
designCustomFilterDesign custom filter for Analog Devices AD936x RF chip
infoObtain radio information
transmitRepeatDownload waveform to radio and repeatedly transmit it over the air


Pluto ReceiverReceive data from Analog Devices ADALM-PLUTO radio
Pluto TransmitterTransmit data to Analog Devices ADALM-PLUTO radio


comm.SDRRxPlutoReceive data from Analog Devices ADALM-PLUTO radio
comm.SDRTxPlutoTransmit data to Analog Devices ADALM-PLUTO radio


Channel I/O

Use ADLAM-PLUTO radio channels to send and receive data.

Repeated Waveform Transmitter

Use a transmitter System object™ for repeated signal transmission.

Detect Underruns and Overruns

To detect underruns and overruns, use the lost sample indicator.

Burst Mode

To achieve real time performance, enable burst mode.


Common Problems and Fixes

Resolve issues encountered while installing or using the features of the support package.