Transmit and receive real-world RF signals
When transmitting or receiving real-world RF signals, use I/O properties and techniques to perform single channel I/O, detect lost samples, apply burst mode buffering, and repeatedly transmit a waveform.
|Create receiver System object for radio hardware|
|Create transmitter System object for radio hardware|
|Capture RF signal data using SDR device|
|Design custom filter for Analog Devices AD936x RF chip|
|Obtain radio information|
|Download waveform to radio and repeatedly transmit it over the air|
|Pluto Receiver||Receive data from Analog Devices ADALM-PLUTO radio|
|Pluto Transmitter||Transmit data to Analog Devices ADALM-PLUTO radio|
|Receive data from Analog Devices ADALM-PLUTO radio|
|Transmit data to Analog Devices ADALM-PLUTO radio|
- Channel I/O
Use ADALM-PLUTO radio channels to send and receive data.
- Repeated Waveform Transmitter
Use a transmitter System object™ for repeated signal transmission.
- Detect Underruns and Overruns
To detect underruns and overruns, use the lost sample indicator.
- Burst Mode
To achieve real time performance, enable burst mode.
Resolve issues encountered while installing or using the features of the support package.