This is machine translation

Translated by Microsoft
Mouseover text to see original. Click the button below to return to the English version of the page.

Note: This page has been translated by MathWorks. Click here to see
To view all translated materials including this page, select Country from the country navigator on the bottom of this page.

Create Hardware Configuration Object

  1. Create a hardware configuration object by using the targetHardware function in the MATLAB® Command Window.

    targetObject = targetHardware('hardwareName')

    For example, to create a configuration object for the Raspberry Pi™ hardware, enter:

    board = targetHardware('Raspberry Pi')
    board = 
    
    targetHardware with properties:
    
                 Name: 'Raspberry Pi'
        DeviceAddress: '172.98.233.234'
             Username: 'pi'
             Password: '*********'
             BuildDir: '/home/pi'
          BuildAction: 'Build, load, and run'
  2. Verify the DeviceAddress, Username, and Password properties listed in the output. If necessary, change the value of the properties by using dot notation syntax.

    targetObj.propertyName = newValue

    For example, to change the device address to 173.21.22.327, enter:

    board.DeviceAddress = '173.21.22.327'