Main Content

RS485 properties

Use the RS485 properties to configure the baud rate for communication and control pin connections of the RS485 network.

You can set these parameters to configure the RS485 properties.

Serial Module

Select the type of serial module or port that the block will use for Modbus® communication. The baud rate, receive pin, transmit pin, data bits length, parity and stop bits are considered from the configuration parameters entry corresponding to the selected serial module.

Settings

Default: SCI 0

DE Pin

Enter the data enable pin number associated with the RS485 shield.

Settings

Default: 8

RE Pin

Enter the receive enable pin number associated with the RS485 shield.

Settings

Default: 9