Before transmitting and receiving radio signals, first apply radio hardware parameters and tune radio properties.
Determine which USRP™ radio products to use.
Single input single output (SISO) operations use one transceiver only.
Multiple Input Multiple Output (MIMO) operations use multiple transceiver chains.
An external clock enables you to synchronize the radio with an external clock generator.
Check radio connection to SDRu blocks and System objects.
Running simulations when no radio is connected.
You can query and set IP address of connected radios.
To detect underruns and overruns, use the lost sample indicator.
To achieve real time performance, enable burst mode.
Set data frame length in receiver blocks or receiver System objects.
To determine whether you receive valid data from the radio hardware, apply conditional execution.
Set the transport data rate in blocks or System objects.
Actual parameter values can vary from your desired setting.
Supported data types for SDRu blocks and System objects.
Describes the most common errors encountered with Communications Toolbox™ Support Package for USRP Radio and how to fix them.