This is machine translation

Translated by Microsoft
Mouseover text to see original. Click the button below to return to the English version of the page.

Note: This page has been translated by MathWorks. Click here to see
To view all translated materials including this page, select Country from the country navigator on the bottom of this page.

Setup Xilinx Zynq Platform and Software

Install Xilinx® software and set up the hardware:

  1. Install a supported version of Xilinx Design Tools, such as ISE Design Suite.

    For more information about supported versions, visit mathworks.com and search for Xilinx Zynq®.

  2. Set up the physical connections to your Zynq platform.

    • The following illustration shows the connections for the ZedBoard™.

    • The following illustration shows the connections for the Xilinx Zynq ZC702 Evaluation Board.

  3. In Windows® 7, open Devices and Printers.

    Locate the USB device that connects to the Zynq platform, such as Silicon Labs CP210x USB to UART Bridge.

  4. Verify that the USB devices have drivers and are working. If not, search for the drivers online and install them.