This is machine translation

Translated by Microsoft
Mouseover text to see original. Click the button below to return to the English version of the page.

Note: This page has been translated by MathWorks. Click here to see
To view all translated materials including this page, select Country from the country navigator on the bottom of this page.

Zynq Video Dataflow

Computer Vision Toolbox™ Support Package for Xilinx® Zynq®-Based Hardware assists you in targeting designs to the FPGA and ARM® processor on the Zynq board. This page explains data path options for moving the video data between the FPGA, external memory, the ARM processor, and the Simulink® host computer.

The Zynq board receives input video through an FMC HDMI module. The video data flows through the FPGA, including your customized FPGA user logic. The FPGA user logic can include an AXI-Stream interface to a frame buffer in external memory or an AXI Master interface for random memory access. The output of the FPGA is then sent back to the HDMI output. You can optionally export the video data to Simulink, or route it to the ARM processor. The video data is in streaming pixel format for HDMI and on the FPGA. When you import this video data to the ARM processor or Simulink, it is converted to frames.

Capture to Simulink

To capture frames to Simulink from the FPGA, use the Video Capture block. Get started by selecting one of these models that include the Video Capture block:

External Memory Interfaces

Template designs provide a simplified external memory interface model for simulation. For deployment, map this interface to the provided memory interface of the reference design. You can model and deploy two kinds of external memory interfaces.

  • Frame Buffer –– The frame buffer interface stores an entire frame and returns the frame when requested. It recreates the streaming video control signals on the output frame. The reference design implements the frame buffer interface using AXI Video DMA. To model a frame buffer in Simulink, and deploy to FPGA, see Model Frame Buffer Interface.

  • AXI Master –– The AXI Master interface provides read and write access to any address. It does not maintain streaming video control signals. To model an AXI Master interface in Simulink,and deploy to FPGA, see Model AXI Master Interface.

Capture to ARM Processor

To route video to the ARM processor, use the Video Capture (software interface) block. You can run this block in external mode or and fully deploy it to the ARM processor. Get started by selecting one of these models:

  • New model. When you generate code for the ARM processor, it runs alongside the default FPGA image loaded at set up. You can change the video format of the captured data using the parameters on the Video Capture (software interface) block.

  • Generated software interface model from HDL Workflow Advisor, after you load your custom FPGA logic to the board. This model already includes the Video Capture (software interface) block. The pixel format parameters match the video format settings on the FPGA, and are informational only. This model also includes a Xilinx Zynq AXI Interface block, with ports to read and write the AXI-Lite registers on the FPGA. See Models Generated from FPGA Targeting.

In either of these models, you can view the modified video frames in Simulink by running the Video Viewer block in external mode.

Related Topics