F28M35x/F28M36x UART Transmit

Transmit serial data to the Universal Asynchronous Receiver Transmitter (UART) port

• 

Libraries:
C2000 Microcontroller Blockset / F2838x / M4
C2000 Microcontroller Blockset / F28M35x / M3
C2000 Microcontroller Blockset / F28M36x / M3

Description

Transmit serial data through the Universal asynchronous Receiver/ Transmitter (UART) port. You can specify ASCII characters for packaging your data with the additional package header and terminator.

Ports

Input

Data — UART send data

vector | scalar

The port sends the data to the UART port.

DMA will be used internally to copy data in FIFO.

Parameters

UART Port — Select UART port for data transmission

UART0 (default) | UART1 | UART2 | UART3 | UART4

Select a port number from UART0 to UART4 for data transmission.

The UART Port selection allows access to the different UART modules present on the processor.

Additional package header — Prefix header

S (default)

Specify the additional package header to use as the prefix before the data packet to synchronize the data packets.

Additional package terminator — Suffix terminator

E (default)

Specify the additional package terminator to use as the suffix after the data packet to synchronize the data packets.

Enable blocking mode — Enable blocking mode for data transmission

off (default) | on

Enabling this option ensures that the FIFO buffer is checked for data availability before sending the data.

Version History

Introduced in R2016b