Wireless Testbench™ provides reference applications that are ready to run on off-the-shelf software-defined radio (SDR) hardware such as USRP™ using over-the-air signals for high-speed data transmit, capture, and spectrum monitoring.
Using MATLAB® command line instructions, you can connect to supported SDR hardware, configure and execute prebuilt FPGA bitstreams as reference applications, and perform real-time measurements.
Using the configurable preamble detector, you can define a trigger to capture only the signal of interest for offline analysis in MATLAB.
Learn the basics of Wireless Testbench
Connect and set up SDR hardware
Transmit and capture IQ data over the air for use in simulation, testing, and validation
Capture and analyze IQ data from the air using preamble detection
Support for third-party hardware