The examples featured here show you how to connect SDR hardware with the WLAN Toolbox™. For more information about supported SDR platforms, see Supported Hardware – Software-Defined Radio (Communications Toolbox).
Use the Xilinx® Zynq-based radio support package with MATLAB® and WLAN Toolbox™ to generate a simultaneous transmission and reception on a single SDR platform.
Use the Universal Software Radio Peripheral (USRP®) device using SDRu (Software Defined Radio USRP®) System objects™ to implement a WLAN receiver. The receiver is able to recover 802.11™ OFDM non-HT beacon frames transmitted over the air from commercial 802.11 hardware.
Transmit and receive WLAN packets on a single radio platform, USRP® Embedded Series Radio Support Package with MATLAB® and WLAN Toolbox™. An image file is encoded and packed into WLAN packets for transmission, and subsequently decoded on reception.
Transmit and receive WLAN packets on a single PlutoSDR device, using the Communications Toolbox™ Support Package for ADALM-PLUTO Radio and the WLAN Toolbox™. An image file is encoded and packed into WLAN packets for transmission, and subsequently decoded on reception.
You clicked a link that corresponds to this MATLAB command:
Run the command by entering it in the MATLAB Command Window.
Web browsers do not support MATLAB commands.
Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: .
You can also select a web site from the following list:
Select the China site (in Chinese or English) for best site performance. Other MathWorks country sites are not optimized for visits from your location.
Contact your local office
Get trial now