Can I use an enabled subsystem to reset a signal generator?

2 vues (au cours des 30 derniers jours)
Fernando
Fernando le 27 Août 2014
Commenté : le 21 Mar 2023
I have a signal generator (ramp) inside an enabled subsystem. I had hoped that I would be able to reset the signal generator when I disabled the subsystem. Unfortunately, this does not appear to work. I would like to be able to use the signal builder to build a signal and then use an enabled subsystem or some other technique to reset this signal when I trigger a particular event.

Réponses (1)

Yu Jiang
Yu Jiang le 28 Août 2014
Hi Fernando
The attached model might be a workaround. Notice that in the subsystem, I double-clicked the enable block and change the "States when enabling:" to "reset". If you would also like to reset the output, you can double-click the out block in the subsystem and change "output when disabled" to "reset".
- Yu
  4 commentaires
Chen Wu
Chen Wu le 26 Août 2021
Thanks, this also solve my question in https://www.mathworks.com/matlabcentral/answers/1439119-output-the-enable-signal-from-enabled-subsystems?s_tid=srchtitle
帅
le 21 Mar 2023
666

Connectez-vous pour commenter.

Catégories

En savoir plus sur Subsystems dans Help Center et File Exchange

Produits

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by