How to solve differential equations with varying constants
16 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
I have 3 equations and 3 variables:
syms u(t) v(t) w(t):
diff(u)=X-q*w+r*v
diff(v)=Y-r*u-p*w;
diff(w)=Z-p*v-q*u;
I want to solve for u,v,w. However constants X, Y, Z and p,q,r have changing values over time and they are defined as arrays. For example X array is something like that:
X=[ -47.9440 19.0518 -14.4223 -47.9833 ......]
or p array is something like that:
p=[ 0.3266 0.0750 0.0111 -0.1975 -0.1741 ......]
Can you help me pls?
0 commentaires
Réponses (2)
Bjorn Gustavsson
le 12 Oct 2021
For the case you describe you have to add information about how X and p varies with time. Are they constant over some fixed intervalls, are they varying continuously in some manner (piece-wise linearly, like polynomial splines)?
For many cases where I have time-varying parameters obtained at fixed times I typically integrate the system of ODEs numerically and interpolate the time-varying coefficients as best I can. For this case that would be something like:
function duvwdt = yourODE(t,uvw,t4interp,X,Y,Z,p,q,r)
u = uvw(1);
v = uvw(2);
w = uvw(3);
Xi = interp1(t4interp,X,t,'pchip');
Yi = interp1(t4interp,Y,t,'pchip');
Zi = interp1(t4interp,Z,t,'pchip');
pi = interp1(t4interp,p,t,'pchip');
qi = interp1(t4interp,q,t,'pchip');
ri = interp1(t4interp,r,t,'pchip');
du = Xi - qi*w + ri*v;
dv = Yi - ri*u - pi*w;
dw = Zi - pi*v - qi*u;
end
This way you can integrate the ODEs with arbitrary smoothly varying coefficients - provided that the interpolation makes an OK representation of the time-variations (whatever OK means).
Then you integrate this with ode45 or any of its siblings:
uvw0 = [1 2 3]; % you'll have to have some initial conditions
t_span = [0,10]; % and some time-interval of interest.
[t,uvw] = ode45(@(t,uvw) yourODE(t,uvw,t4interp,X,Y,Z,p,q,r),t_span,uvw0);
Here you would have to make sure that your parameter-arrays (X,Y,Z,p,q,r) are available for the entire time-interval and that t4interp are the same for all 6 parameters, if they are at given at different "sampling-times" the modification should be trivial.
If your parameters are constant at different time-intervalls - then you will have to solve the equations intervall-for-intervall either numerically (by using the final values of the solution of the previous intervall as initial conditions for the following intervall) of analytically (for which you'll have to patch the solutions together at the intervall boundaries).
HTH
1 commentaire
John D'Errico
le 12 Oct 2021
If a constant varies with time, then is it really a constant? Of course not.
X=[ -47.9440 19.0518 -14.4223 -47.9833]
If this variable varies with time, then at which times are those values associated?
You should learn to use an interpolation scheme. I would suggest here to use a tool like spline, makina, or pchip.
t_X = [0 1 2 3];
Xspl = spline(t_X,X);
this is now a function of time. You can pass it around, using a tool like fnval, or ppval to evaluate it at any given time in the domain of support, thus the interval [0,3].
fnval(Xspl,2.3)
0 commentaires
Voir également
Catégories
En savoir plus sur Mathematics and Optimization dans Help Center et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!