How do I translate a variable into HSV color values?
2 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
Shovnik Paul
le 15 Juil 2022
Commenté : William Rose
le 15 Juil 2022
I have this project where I am interfacing MATLAB with an Arduino board and reading input from an analog pin connected to a potentiometer. I want to use the voltage values read from the potentiometer to control the color of a rectangle. The voltage read is stored in the variable voltage
I have the following code:
while true
voltage = a.readVoltage('A0');
color = ??voltage??
fill([0 1 1 0], [0 0 1 1], color)
pause(0.1)
end
I would like to map the variable voltage to an HSV color value, specifically controlling the H(hue) parameter - so than when I turn my potentiometer wheel, I basically cycle through the different colors of the color wheel (ie change the hue). Is this possible? Any help is appreciated. Thanks.
Edit: the value of the voltage variable is in the range 0 - 5.
0 commentaires
Réponse acceptée
William Rose
le 15 Juil 2022
Vmax=5;
while true
voltage = a.readVoltage('A0');
color = hsv2rgb(voltage/Vmax,1,1);
fill([0 1 1 0], [0 0 1 1], color);
pause(0.1)
end
Try the above. I tested it with the following modified code, which does not require an external input. It worked as expected, generating a whole range of colors from R to Y to G to C to B to M to R.
Vmax=5;
for i=0:24
voltage = i*Vmax/24;
color = hsv2rgb(voltage/Vmax,1,1);
fill([0 1 1 0], [0 0 1 1], color);
pause(0.5)
end
Good luck.
2 commentaires
Plus de réponses (0)
Voir également
Catégories
En savoir plus sur Instrument Control Toolbox dans Help Center et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!