How to redefine waypoints for the desired path for the robot?
3 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
Arun Adiththan
le 14 Juil 2017
Réponse apportée : Prashant Arora
le 17 Juil 2017
I use the example here (https://www.mathworks.com/help/robotics/examples/path-following-for-a-differential-drive-robot.html) to describe a set of waypoints for the desired path using an array. The robotic controller computes control commands to reach the specified goal along the waypoints. Say, I want to update the waypoints midway to specify a different route to reach the originally specified destination. Any inputs on how I could realize this would be helpful. Thanks!
0 commentaires
Réponse acceptée
Prashant Arora
le 17 Juil 2017
Hi Arun,
I understand that you would like to update the waypoints of the controller during simulation. You can achieve this by simply changing the "Waypoints" property of the controller using the following command:
controller.Waypoints = updatedPath;
updatedPath variable defines waypoint similar to "path" variable in the example you mentioned. You can also change the conditional convergence by re-calculating "distanceToGoal".
0 commentaires
Plus de réponses (0)
Voir également
Catégories
En savoir plus sur Publishers and Subscribers dans Help Center et File Exchange
Produits
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!