Why do motion measurements depend on the location where the Environment block is connected relative to the Variable Ratio Gear block in SimDriveline 1.0.2 (R14SP2)?
2 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
In the attached model 'new_model.mdl', the motion measurement answer varies depending on which side of the Variable Ratio Gear block the Driveline Environment block is attached.
In this model with a Variable Ratio Gear in the driveline, compare the motion measurements obtained by attaching the Environment block to the left part of the driveline as opposed to attaching it to the right part. Attaching on the right (F) side yields unreasonable velocities for that driveline axis.
Réponse acceptée
MathWorks Support Team
le 27 Juin 2009
This enhancement has been incorporated in Release 14 Service Pack 3 (R14SP3). For previous product releases, read below for any possible workarounds:
We have verified that there is a bug in SimDriveline 1.0.2 (R14SP2) in the way that motion measurements vary depending on which side of the Variable Ratio Gear block the Driveline Environment block is attached.
To work around this issue, download a revised version of the files mentioned below. Here are the required steps:
1. Quit MATLAB
2. Download the file 'drive_engine.mexglx' and place the file in the following directory:
$MATLABtoolbox\physmod\drive\drive\
(where $MATLAB is the MATLAB root directory on your machine, as returned by typing
matlabroot
at the MATLAB command prompt.)
3. Download the file 'drive_codegen_files.tar.gz', unzip it, and place the unzipped files in the following directory:
$MATLAB\toolbox\physmod\drive\c\
(where $MATLAB is the MATLAB root directory on your machine, as returned by typing
matlabroot
at the MATLAB command prompt.)
4. Download the file 'drive_precomplib_glnx86.tar.gz', unzip it, and place the unzipped files in the following directory:
$MATLAB\toolbox\physmod\drive\lib\glnx86\
(where $MATLAB is the MATLAB root directory on your machine, as returned by typing
matlabroot
at the MATLAB command prompt.)
4. Restart MATLAB
5. After restarting MATLAB, issue the following command at the MATLAB prompt:
rehash toolboxcache
Note: This solution is for Linux only
0 commentaires
Plus de réponses (0)
Voir également
Catégories
En savoir plus sur Simscape Driveline dans Help Center et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!