Réponse apportée
Write a code in Matlab to generate a realistic synthetic ECG signal (which includes the noise aspect) , demonstrate Visualization of the signal in both the time and frequency
Hi @Karen, As I see, you are looking to generate synthetic ECG signals with random noise. You can refer to the following discus...

environ un an il y a | 0

Réponse apportée
Batch inconsistency in PINNs!!
Hi @MAHSA YOUSEFI, As I see, you are looking for an explanation of the function “cat(1, X, T)” which concatenates on dimension ...

plus d'un an il y a | 0

| A accepté

Réponse apportée
Electrical transformer frequency response analysis
Hi @HENRI Djoma M'SSA, As I understand it, you are looking to perform Frequency Response/Domain Analysis of an “Electrical Tran...

plus d'un an il y a | 0

Réponse apportée
Power supply control using Instrumental control tool box
Hi @Ravi Sankar, As I understand it, you are looking to control a power supply using the “Instrument Control Toolbox.” This is...

plus d'un an il y a | 0

Réponse apportée
How to change pole configuration for Commutation of SRM Using Sensor Feedback example?
Hi @RK, As I understand, you are referring to the example of “Commutation of SRM Using Sensor Feedback” available at this link:...

plus d'un an il y a | 0

Réponse apportée
how export Inventor model in multibody simscape
Hi @Remi Ducharne, As I understand it, you want to export an Autodesk Inventor model and import it into Simulink Multibody. To ...

plus d'un an il y a | 0

Réponse apportée
dsp.ColoredNoise pinknoise's max and min is not 1 even bounded output is true?
Hi @venkat ta, As I understand it, you are expecting the values +1 and -1 as the minimum and maximum, respectively, for the "pi...

plus d'un an il y a | 0

Réponse apportée
Boundary Conditions for Schroedinger Equation in pdeModeler
Hi Sejal, As I understand it, you are looking to model the Schrödinger equation using the "PDE Modeler." Since there is no dire...

plus d'un an il y a | 1

Réponse apportée
Wrong output from network function, exported from nprtool
Hi @Thomas, As I understand it, you are trying to predict the class using the trained “patternnet” loaded from workspace. To c...

plus d'un an il y a | 0

Réponse apportée
Does the RF box have a tramission line defined by its characteristic impedance an physical Length?
Hi @Pierre, As I understand it, you are looking for a block for modeling transmission lines defined by "Characteristic Impedan...

plus d'un an il y a | 0

| A accepté

Réponse apportée
How can I export .mkv file containing depth data to .ply file?
Hi @海志, As I understand it, you already have the video containing depth frames, which can be extracted using the “VideoReader”...

plus d'un an il y a | 0

Réponse apportée
Do any one share simulink model for extracting Radio data System text message?
Hi @vivekkumar singh, As I understand it, you are trying to decode a text message from "RDS/RBDS." For ODAs, the "RDS/RBDS" re...

plus d'un an il y a | 0

Réponse apportée
Simulation of pneumatic systems
Hi @Sai, As I understand, you are looking for guidance on modeling a pneumatic system using Simscape. The following example mi...

plus d'un an il y a | 0

Réponse apportée
Skip reading a file with file datastore
Hi Heine Hørup Pedersen, As I understand, you are trying to achieve the behavior of "next(fds)" on a "FileDatastore" object "fd...

plus d'un an il y a | 1

| A accepté

Réponse apportée
How can we model linear hardware distortion at the transmitter?
Hi @A_SD, As I understand, you are trying to model linear distortion at the transmitter. This can be achieved by configuring an...

plus d'un an il y a | 0

Réponse apportée
Modeling condensation of the outer pipe surface of the Pipe (MA) Simscape model
Hi @Philip, As I understand, you're trying to model the effect of moist air in contact with a cold pipe surface. This can be a...

plus d'un an il y a | 0

| A accepté

Réponse apportée
Input size error when using unet3dLayers with valid convolutional padding
Hi @Timothy, As I understand it, you are trying to compute “unet3Dlayers” on a patch of size [36, 36, 36, 1], which results in ...

plus d'un an il y a | 0

| A accepté

Réponse apportée
Which one is the joystick ID?
Hi @Pancy, As I understand it, you are trying to use the "vrjoystick" function. The "id" parameter, as mentioned in the documen...

plus d'un an il y a | 0

| A accepté

Réponse apportée
Issue with Aardvark Interface in Instrument Control Toolbox
Hi @豪人, As I understand you are experiencing an issue with the Aardvark interface after installing the "Instrument Control Too...

plus d'un an il y a | 0

Réponse apportée
LSTM identification and modeling
Hi @Jesus Mª Juarez Ferreras, I understand that you are attempting to estimate a state-space model from a trained LSTM model. T...

plus d'un an il y a | 0

| A accepté

Réponse apportée
I have a question regarding SatCom toolbox, is there a way to make the transmitter "Laser" and the receiver "Photodetector"?
Hi @Reham Wafaee, As I understand it, you are trying to perform optical communication using the "Satellite Communication Toolbo...

plus d'un an il y a | 0

Réponse apportée
Display circuit diagram from command window
Hi @sansan As per my understanding, you are trying to open models using the Simulink graphical environment on mobile. This is n...

plus d'un an il y a | 0

Réponse apportée
Unable to connected to xcp using peak system
Hi Ashraf, As per my understanding, you are able to connect to PEAK CAN but not to the XCP server. To troubleshoot the connecti...

plus d'un an il y a | 0

Réponse apportée
How do I extract or call a set of data like PSD(particle size distribution) to Matlab from Aspen Plus using Actxserver without using Excel?
Hi Gopi, As per my understanding, you are trying to link Aspen Plus with MATLAB through COM. There is a File Exchange submissio...

plus d'un an il y a | 0

Réponse apportée
Change format of field contour labels that have been manually added in a tiled layout
Hi @Daniel, I also observed the same error at “clabel(C, H, “manual”)” inside tiledLayout. I find that you could use subplot fo...

plus d'un an il y a | 0

Réponse apportée
SDR WiFi Beacon transmit and receive length
Hi @Michael Burke, I understand that you are trying to capture data using the ADALM-PLUTO Radio, I couldn’t find “captureWaveF...

plus d'un an il y a | 0

Réponse apportée
Is it correct to increase the number of voices per octave above 48 when using the wsst function?
Hi @Marc Heras Puig As per my understanding, you are aiming to increase the resolution your result using the “wsst” function. P...

plus d'un an il y a | 0

Réponse apportée
Is there a possibility of MCDC coverage while MIL/SIL testing with TragetLink
Hi @Girish, It is possible to use Simulink Coverage tools and obtain "MCDC" coverage, which falls under Model Coverage during M...

plus d'un an il y a | 0

Réponse apportée
How to implement ESN layers or more generally reservoir computing approach in MATLAB DDPG agent
Hi @Amir, ESN layer is not supported as of now in MATLAB as of now. You may find this file exchange useful which contains the ...

plus d'un an il y a | 1

Réponse apportée
Regenerative Braking using BLDC Motor
Hi @Shreyas, Here are some useful documentation links for designing braking circuit using BLDC motor: https://www.mathworks.co...

plus d'un an il y a | 0