Réponse apportée
How can I define a custom BlockType in Simulink
The |BlockType| parameter cannot be customized, and is only defined by internal blocks. For your case, perhaps you could use |Ma...

plus de 10 ans il y a | 1

Réponse apportée
DLL issues with matdgns.c example
Are you attempting to run the application on a different machine from the one you compiled on? Visual Studio has runtime librari...

plus de 10 ans il y a | 0

Réponse apportée
is it possible to update the parameter of synchronous generator block in simulink through a matlab programme
Yes, you can use the <http://www.mathworks.com/help/simulink/slref/set_param.html set_param> command.

plus de 10 ans il y a | 0

Réponse apportée
Inclusion of custom ENUM file during code generation throwing error
Is the header file getting included multiple times in the generated code? If so, you may want to try using <http://en.wikipedia....

plus de 10 ans il y a | 0

Réponse apportée
Simulink block with dynamic input port width and fix output port width
According to the documentation for <http://www.mathworks.com/help/simulink/sfg/sssetinputportwidth.html ssSetInputPortWidth>: ...

plus de 10 ans il y a | 0

Réponse apportée
Real time workshop does not appear in Configuration Parameters (Matlab 2014a)
Real-Time Workshop has been renamed to "Simulink Coder" for a few releases now. The related pane in the Configuration Parameters...

plus de 10 ans il y a | 0

Réponse apportée
Faster way to run simulink simulation repeatedly for a large number of time
I think you will find the <http://www.mathworks.com/help/simulink/ug/saving-and-restoring-the-simulation-state-as-the-simstate.h...

plus de 10 ans il y a | 0

Réponse apportée
Can Simulink make blocks unviewable/uneditable to users?
Please see <http://www.mathworks.com/help/simulink/ug/protecting-referenced-models.html Protected Models>.

plus de 10 ans il y a | 0

Réponse apportée
How to call C code generated with Matlab Coder from the statisticaL package R
Please see <http://www.mathworks.com/help/fixedpoint/ug/c-code-interface-for-unbounded-arrays-and-structure-fields.html#bsp2zmx ...

plus de 10 ans il y a | 0

| A accepté

Réponse apportée
how to make a loop for a simulation?
It seems like you can achieve the same result by using a Scope block with a Decimation factor of 10. Is there a reason you want ...

plus de 10 ans il y a | 0

Réponse apportée
how to use m file in simulink
Not sure what you mean by "use the plot in Simulink" - do you just need to use |x| as time and |y| as data in the model? In that...

plus de 10 ans il y a | 0

Réponse apportée
Find differences between two simulink blocks
Please see this previously answered question: http://www.mathworks.com/matlabcentral/answers/39708-tool-for-showing-difference-b...

plus de 10 ans il y a | 0

Réponse apportée
How to hide/protect my *.mdl file from the final user, who need to run it?
You may want to look into <http://www.mathworks.com/help/simulink/ug/protecting-referenced-models.html protected models>.

plus de 10 ans il y a | 0

| A accepté

Réponse apportée
how to avoid rounding off error in simulink calculations?
The difference between 46.7889e5 and 46.7890e5 is 10, which is too large to be a rounding error. Most likely, what is happening ...

plus de 10 ans il y a | 0

| A accepté

Réponse apportée
Significant Figures in Simulink
I'm not very familiar with this area, but it seems to me like you might need to replace your data types with <http://www.mathwor...

plus de 10 ans il y a | 0

Réponse apportée
S-Function Block and Masking Parameters
To set the number of inputs/outputs based on parameter values, you can add code such as the following to your |setup| function: ...

plus de 10 ans il y a | 0

| A accepté

Réponse apportée
Invalid MEX-file, likely missing .dll
Could you please explain this statement: "libmysql.dll is exactly in the position specified" - how do you specify this path? Typ...

plus de 10 ans il y a | 0

Réponse apportée
SImple question about Simulink S function
You can use |block.CurrentTime| to get the current time in the S-function. You can use a DWork to store the current time at each...

plus de 10 ans il y a | 0

| A accepté

Réponse apportée
(Simulink) Triggered Delay Line gone in 2014a. Replacements?
I don't know enough about the block, but perhaps you could try putting it inside a <http://www.mathworks.com/help/simulink/slref...

plus de 10 ans il y a | 0

Réponse apportée
How to use Matlab generated c code for High Level Synthesis ?
If you're using a synthesis tool, don't you need HDL code, and not C code? You probably should be using <http://www.mathworks.co...

plus de 10 ans il y a | 0

Réponse apportée
I have installed dSPACE 6.5 version in 2009a MATLAB. I found warning message as Real time workshop is not installed or not licensed. Anybody can tell please which tool box is responsible for connection betweeen SIMULINK and dSPACE
See <http://www.dspace.com/en/pub/home/products/sw/pcgs/targetli.cfm dSPACE TargetLink>.

plus de 10 ans il y a | 0

| A accepté

Réponse apportée
Co-simulation between Matlab and Dymola
When you say co-simulation between MATLAB and Dymola, you mean MATLAB and not Simulink right? (Because S-functions are a Simulin...

plus de 10 ans il y a | 0

Réponse apportée
How to build, connect to target and run a simulink model with GUI?
If you'd like to access data during simulation, please follow the methodology described <http://www.mathworks.com/help/simulink/...

plus de 10 ans il y a | 1

| A accepté

Réponse apportée
Simulink Sfunction Error - not a valid Win32 application
My guess is that your update either wiped out your system PATH environment variable or uninstalled your Visual C++ redistributab...

plus de 10 ans il y a | 0

Réponse apportée
How can I generate a ccs project base on the **.out file which comes from matlab2013a/simulink and ccs4 ？
Project generation with Simulink is not supported for CCSv4/5, this is only possible with older versions of CCS. You need to use...

plus de 10 ans il y a | 0

Réponse apportée
SIMULINK Code Generation with USB Webcam under Ubuntu
Are you able to run the model using: >> !sudo ./model at the MATLAB prompt? If yes, it could be that libmwimaqmex.so nee...

plus de 10 ans il y a | 0

Réponse apportée
How can I replace ksdensity for c++ generation with the Matlab Coder ?
I don't know of a MATLAB function equivalent that is supported for code-generation, but if you are able to find a C implementati...

plus de 10 ans il y a | 0

| A accepté

Réponse apportée
How to set temporary variables as Gain parameters in Simulink ?
The SIM command looks for variables in the base workspace by default. In this case, 'x' is present in the caller functions works...

plus de 10 ans il y a | 0

| A accepté

Réponse apportée
What is a non-inlined S function
Please see the documentation for <http://www.mathworks.com/help/rtw/ug/s-functions-for-code-generation.html#f53130 Noninlined S-...

plus de 10 ans il y a | 0

Réponse apportée
Error : Subscripting into an mxArray is not supported.
Please see <http://www.mathworks.com/matlabcentral/answers/122167-subscripting-into-an-mxarray-is-not-supported this previously ...

plus de 10 ans il y a | 0