Réponse apportée
can hardware support packages be installed to the matlab runtime?
Typically the hardware support packages for Instrument Control Toolbox only install the vendor driver on your computer. I suspec...

plus de 10 ans il y a | 1

| A accepté

Réponse apportée
Is it possible to acquire data in real time from a YOKOGAWA DL708E oscilloscope using Instrument Control Toolbox?
Does the scope have a serial, ethernet or GPIB interface? If so, most likely. You will need to look up the scope's programmer's ...

plus de 10 ans il y a | 0

| A accepté

Réponse apportée
Matlab 2014a crashes when i type in instrhwinfo('Bluetooth') in the command window!!!
If using Mac OS X > v 10.8, please upgrade to MATLAB R2016a or newer.

plus de 10 ans il y a | 0

Réponse apportée
Bluetooth connection between Lego Mindstorms NXT and MATLAB
Bluetooth on Mac OS X 10.10 and higher are supported in MATLAB R2016a and newer.

plus de 10 ans il y a | 1

Réponse apportée
Instrument Control Toolbox with NI-FGEN
There is a support package that does all you need. It also gives you the MDD: <http://www.mathworks.com/matlabcentral/fileexc...

plus de 10 ans il y a | 0

Réponse apportée
get and set duty cycle in function geneator
I'm assuming you are using SCPI commands to control the device. If so, refer to the instrument's programmer's manual for the app...

plus de 10 ans il y a | 0

Réponse apportée
How do I use Instrument Control to read an instrument's status byte?
Out of curiosity, what additional data do you need that SPOLL is not sufficient? Also, in many instruments the SCPI parser is sm...

plus de 10 ans il y a | 0

Réponse apportée
Instrument Control Toolbox won't recognize NI-VISA drivers on OS X Lion
You should be able to use <http://www.mathworks.com/matlabcentral/fileexchange/49659-instrument-control-toolbox-support-package-...

plus de 10 ans il y a | 0

Réponse apportée
Matlab Student 2014a Instrument Control App exits on scan for devices
MATLAB R2016a should support your Bluetooth SPP workflows if you are running the newer versions of Mac OS X (such as Yosemite or...

plus de 10 ans il y a | 0

Réponse apportée
The Hardware Support Package for NI-845x USB SPI/I2C does not provide full access to the drivers. How to improve that ?
Create a new request with <http://www.mathworks.com/support/contact_us MathWorks technical support> to add the functionality you...

plus de 10 ans il y a | 0

Réponse apportée
How to get correct data from OSC Agilent?
Have you seen this example: http://www.mathworks.com/matlabcentral/fileexchange/28887 Notes: * You will likely have to ...

plus de 10 ans il y a | 0

| A accepté

Réponse apportée
Can I use DAQ Toolbox Adaptor kit to connect my device with Session-based DAQ Toolbox ?
The DAQ adaptor kit is only usable by vendors to add support for their hardware to the legacy interface to DAQ devices. The lega...

plus de 10 ans il y a | 0

| A accepté

Réponse apportée
How To define a sine wave of different amplitude and frequency over a specific period of time
Have a look here: https://www.mathworks.com/company/newsletters/articles/downloading-a-custom-waveform-to-an-arbitrary-wavefo...

presque 11 ans il y a | 0

Réponse apportée
How to set the frequency of a square waveform on a non-clocked digital output channel
What is the samplerate of the session, s?

presque 11 ans il y a | 0

Réponse apportée
Trouble linking my national instruments USB-6009 to matlab.
What version of the NI-DAQmx drivers do you have installed? Can you try again after installing the Data Acquisition Toolbox Supp...

presque 11 ans il y a | 0

Réponse apportée
Could I use Instrument Control toolbox with Ni-Scope and PXIe-5105 in Matlab 2015a ?
At the very least you will need to install the <https://www.mathworks.com/hardware-support/ni-scope.html Hardware support pack...

presque 11 ans il y a | 1

Réponse apportée
How to trigger analog inputs on a threshold levels using session based interface?
Take a look at this example. I believe it does what you're after: <http://www.mathworks.com/help/daq/examples/software-analog...

presque 11 ans il y a | 1

Réponse apportée
hi ,,,i want a code for working matlab with digilent device
Install this support package: http://www.mathworks.com/hardware-support/digilent-analog-discovery.html See the examples wh...

presque 11 ans il y a | 0

Réponse apportée
How to solve ADALM1000 not seen by Matlab?
You need the latest firmware of the device as the old firmware has very serious bugs and is unsupported in MATLAB. Could you ...

presque 11 ans il y a | 0

| A accepté

Réponse apportée
differential data channels with data/instrumentation toolbox not matching NI MAX
This could be because of rewiring. During the rewiring process, one of the wires may be inducing a signal in an adjacent wire or...

presque 11 ans il y a | 0

Réponse apportée
hardware discovery using instrhwinfo
Your standalone application will require the user of the application to install any 3rd party drivers such as Agilent VISA. With...

presque 11 ans il y a | 1

| A accepté

Réponse apportée
Problem receving countinously data with a UDP socket connection
Based on your description I wonder if this is just that your device is continually sending the same value that is filling up you...

presque 11 ans il y a | 0

Réponse apportée
No data acquisition devices available for ADALM1000
You need the latest firmware of the device as the old firmware has very serious bugs and is unsupported in MATLAB. Could you ...

presque 11 ans il y a | 0

Réponse apportée
return empty when I enter “”instrhwinfo('Bluetooth','Hphone')“”
In this case this was because the phone did not support Bluetooth Serial Port Profile. Note that this may also have to do wit...

presque 11 ans il y a | 0

Réponse apportée
Unsuccesful binblockread with Tektronix DPO 2014
The CURVE? command can take some time to execute. This is likely why the BINBLOCK data is not available to read. Rather than ...

presque 11 ans il y a | 0

| A accepté

Réponse apportée
How can I automatically enumerate all instruments connected within a LAN to a host PC?
Try the instrhwinfo function. If all your devices are registered in your VISA vendor, you can do this: >> a = instrhwinfo...

environ 11 ans il y a | 0

Réponse apportée
Matlab Student 2014a Instrument Control App exits on scan for devices
This was related to changes Apple made in OS X and is specific to the Mac. This has since been resolved and the app no longer cr...

environ 11 ans il y a | 0

Réponse apportée
time lag in plotting and acquiring data with Instrumentation toolbox
Take a look at this example http://www.mathworks.com/help/daq/examples/software-analog-triggered-data-capture.html You can...

environ 11 ans il y a | 0

Réponse apportée
How to send an array from client to server ?
Check out this blog. http://blogs.mathworks.com/loren/2011/05/27/transferring-data-between-two-computers-using-matlab/

environ 11 ans il y a | 0

Réponse apportée
Read Interval Timeouts for Serial Communication
I suspect you are better off by using a BytesAvailableFcn callback to read back the specified number of bytes from the device wh...

environ 11 ans il y a | 0