Ankit Desai

MathWorks

Last seen: Today | Actif depuis 2011

Followers: 0 Following: 0

Contact

Software Quality Engineering Manager - Internet of Things and MathWorks Community Team.
Interests: Microcontrollers (Arduino, Beaglebone, Raspi etc.), ThingSpeak

Statistiques

All

Afficher les badges

Feeds

A répondu
Can I use MATLAB to communicate with a Serial Port and/or a Virtual Serial (USB-to-Serial) Port?
You can use MATLAB to talk to your computer's serial port on any of the MATLAB's <http://www.mathworks.com/support/sysreq/curren...

environ 9 ans il y a | 3

| A accepté

A répondu
send data from one computer to an other computer using matlab via internet.
If you are using MATLAB R2011a, you can use Instrument Control Toolbox's TCPIP object as a Server Socket via the NetworkRole pro...

plus de 9 ans il y a | 1

A répondu
Why i can't connect with an instrument using ivi com driver?
IVI-COM is not supported on 64-bit platform. However, if the driver installs both the 32 as well as 64 bit, then you should be a...

environ 11 ans il y a | 0

A répondu
Plot data with time axis
<http://www.mathworks.com/matlabcentral/fileexchange/25519-collect-and-plot-data-from-an-instrument-in-real-time This file excha...

plus de 11 ans il y a | 1

| A accepté

A répondu
Bluetooth Communication over MatLab
Hi Chris, You might want to consider a couple of things: # Make sure that the device is paired prior to accessing it in MA...

environ 12 ans il y a | 0

| A accepté

A répondu
Recieving UDP from iphone
You can use <http://www.mathworks.com/products/instrument/ Instrument Control> Toolbox's <http://www.mathworks.com/help/toolbox/...

plus de 12 ans il y a | 2

A répondu
Transfer data wireless
<http://blogs.mathworks.com/loren/2011/05/27/transferring-data-between-two-computers-using-matlab/ This blog> post might be help...

plus de 12 ans il y a | 0

A répondu
Connect a socket of TCP/IP on the same machine, R2009b and VC++2008 express SP1
<http://blogs.mathworks.com/loren/2011/05/27/transferring-data-between-two-computers-using-matlab/ This blog> post might be help...

plus de 12 ans il y a | 0

| A accepté

A répondu
How do I write to move the line in sending serial?
When using serial object (and any Instrument Control Toolbox object) using fprintf will automatically append the 'Terminator' ch...

presque 13 ans il y a | 0

A répondu
Serial port is not available in GUI but it actually available in my pc
There are a few things that you might want to check: # Make sure the port is not used in any other application (such as hyper...

presque 13 ans il y a | 0

A répondu
matlab interface
You should be able to talk to the device using the serial port. The <http://www.mathworks.com/matlabcentral/answers/3360-can-i-...

presque 13 ans il y a | 0

A répondu
Trouble interafcing FS300 SpecAn using USB interface and NI VISA 5.0.3 with Matlab
If you plan to communicate with the instrument using low level SCPI commands, via <http://www.mathworks.com/help/toolbox/instrum...

presque 13 ans il y a | 0

| A accepté

A répondu
MATLAB interface instrument driver
MDD files can be of multiple types. For example: 1. MATLAB Interface Instrument Driver 2. MATLAB VXIPnP Instrument Driver 3. MA...

presque 13 ans il y a | 1

| A accepté

A répondu
cannot connect to instrument using IVI driver
Since I do not have the actual instrument, I was not able to try it out with one - but I was able to successfully connect using ...

presque 13 ans il y a | 1

| A accepté

A répondu
Reading signed data from RS232
You can provide the precision that you want to use with fread. The <http://www.mathworks.com/help/techdoc/ref/serial.fread.html...

environ 13 ans il y a | 0

A répondu
Help request: using Instrument Control toolbox with Ni-Scope and PXI-5122
You can get the correct resource string from either the NISCOPE front panel application that comes with the NISCOPE driver or fr...

environ 13 ans il y a | 0

A répondu
i want to read the serial data using for loop... and want to get a real time data plot
You might also want to consider using an event based read from serial port rather than a while or for loop. If you are getti...

environ 13 ans il y a | 0

A répondu
VXIPNP - Matlab instrument driver
To check that you have the basic setup correct, you might want to follow the <http://www.mathworks.com/products/instrument/demos...

environ 13 ans il y a | 0

A répondu
TMTool/MIDEdit Driver in Simulink
Currently there isn't any way to call a function defined in the driver file from within a Simulink model. You might want to ...

environ 13 ans il y a | 0

A répondu
Message truncation/concatenation in TCP/IP between MATLAB and Swistrack
<http://www.mathworks.com/help/toolbox/instrument/fscanf.html fscanf> reads the data from the object until one of the following ...

environ 13 ans il y a | 0

| A accepté

A répondu
Test & Measurement tool (tmtool): calling two or more channels in readwaveform
If you don't mind writing a little MATLAB code, you can open the MATLAB Instrument Driver in midedit tool and add your own, cust...

environ 13 ans il y a | 1

A répondu
Realtime Plotting of RS232 Data Help
Hi, You might want to look at the examples available on MATLAB Central File Exchange: 1. <http://www.mathworks.com/matlabc...

environ 13 ans il y a | 1

A répondu
PROBLEM -> INSTRUMENT CONTROL - R&S CMU 200
Hi Karthik, When using GPIB interface, you might want to make sure that your instrument is configured to use GPIB interface a...

environ 13 ans il y a | 0

A répondu
tmtool doesn't detect Agilent 4339b over GPIB or VISA, can't communicate
Hi Wes, You must configure vendor's VISA utility before those instruments can show up in MATLAB. For NI VISA the utility is c...

environ 13 ans il y a | 0

Question

Can I use MATLAB to communicate with a Serial Port and/or a Virtual Serial (USB-to-Serial) Port?
Is it possible to communicate with a Serial Port either built-in to my computer or a Virtual Serial Port (USB-to-Serial adaptor)...

environ 13 ans il y a | 1 réponse | 0

1

réponse

A répondu
Programming Automated Test Equipment with MATLAB instrument control toolbox
Hi Matt, You should be able to communicate over GPIB using the Instrument Control Toolbox. Once you have the GPIB object cre...

environ 13 ans il y a | 1

A répondu
Reading from serial port
Akash, You might be getting the data slowly. The delay might be caused by _fscanf_ waiting for data to be available. As liste...

environ 13 ans il y a | 0

A répondu
Does serial () detect a virtual COM port
You should be able to get a USB-to-Serial adaptor to show up in MATLAB. Remember to restart MATLAB to see the new port show up. ...

environ 13 ans il y a | 1

A répondu
in-code scanning of com port and acquierement of a stills image
If you are facing problems in getting the Serial Port communication going the way you want, here are some links that might help ...

environ 13 ans il y a | 0

Ankit Desai

MathWorks

Statistiques

File Exchange

File Exchange

File Exchange

File Exchange

MATLAB Answers

MATLAB Answers

MATLAB Answers

MATLAB Answers

Cody

Feeds

1