A répondu
What would be the total flow rate inside the hydraulic cylinder chamber when modeled with piston chamber and hydro-mechanical converter?
The first a few paragraphs of the documentaion pages for theTranslational Mechanical Converter (IL) and the Translational Hydro-...

10 mois il y a | 0

A répondu
How to move the rod of a cylinder?
So far, the only way in Simscape to prescribe a mechanical motion is using a velocity source, while in Simscape Multibody, the o...

10 mois il y a | 0

A répondu
Specific and ideal pressure and flow
In general, one cannot prescribe both the pressure at and the flow through a node at the same time. If a pressure is prescribed...

10 mois il y a | 0

A répondu
Water supply system-Simulink
Depending on what physical domain you are thinking of, a few pipeline blocks in the Simscape Fluids library allow the modeling o...

10 mois il y a | 0

A répondu
How to control simscape ball valve block
Looks like an earlier version of question: https://www.mathworks.com/matlabcentral/answers/502708-control-of-ball-valve?s_tid=s...

10 mois il y a | 0

A répondu
Simscape 2P: How can I realize both varying local restriction and blocking the flow path.
Besides from my comment earlier, I've found that using a custom block of a "variable flow resistance" seems to make thing easier...

10 mois il y a | 0

A répondu
Optimal components for a two-stage heat pump in Simscape
It puzzles me why there isn't a flow out of the BV port of the tank. There isn't a flow into BV port either? The BV port is co...

10 mois il y a | 1

A répondu
Simscape Pipe array (many pipes in parallel)
It's possible to do it in the way you described. I attached a sample of "flow multiplier" and "thermal liquid multiplier". Dep...

10 mois il y a | 0

A répondu
how can i do two phase to thermal liquid connection?
Hi Davod, This wasn't possible until the R2021a release of Simscape Fluids. https://www.mathworks.com/help/physmod/hydro/ref/i...

10 mois il y a | 0

A répondu
How change simscape simulation time from seconds (sec.) to hours (h)
Just to summarize the thread of comments, so the question appears as "Answered". The easiset way is to multiply the duration of...

10 mois il y a | 0

A répondu
Simscape Fluids - The best way to inputs parameters on the Displacement Pump Rexroth
Hi Diego, It's very common that the supplier doesn't provide ALL technical data. Some educated guess is often needed. The fir...

10 mois il y a | 0

A répondu
How can i give more accurate initial conditions ?
The pump module has no input (velocity or torque) at the shaft. The system of equations is missing conditions needed to start t...

10 mois il y a | 0

A répondu
What causes the pressure behavior in valves?
Hi Michael, I think there are a couple things at play here: First, there is currently no volume at all between the two reservo...

10 mois il y a | 0

A répondu
Why the volumic flow rate sensor (motion air) is registering a negative value?
As @VBBV mentioned in the comment, switching the A/B port is likely the solution. Is this turbine block the same one as in theA...

10 mois il y a | 0

A répondu
Simscape fluids and Ansys CFX
Hi Federico, For the block you mentioned, tabulated data or polynomial coefficients (which will require some data fitting) are ...

10 mois il y a | 1

| A accepté

A répondu
Recursive type equation solution in simscape
Feels like you are trying to use Simscape like MATLAB :p, by considering how to use iterations to do the numerical integration. ...

10 mois il y a | 0

A répondu
air-oxygen mixing model in a continuous process
You should be able to use the Moist Air (MA)domain for such a purpose. The domain keep tracks of the concentration, mass, and e...

10 mois il y a | 0

A répondu
Problems with Organic Rankine Cycle Simulation
If you are new to Simulink and Simscape, consider the free, interactive tutorials known as the Onramps first. Simulink Onramp: ...

10 mois il y a | 1

| A accepté

A répondu
How to connect elements form different simscape sub-libraries?
I believe you may use two orifices to achieve what you have described. Just control the input area to each to adjust the amount...

10 mois il y a | 0

A répondu
How to use Simscape to solve heat conduction equation?
I guess by "wrong results" you mean the measured heat flow rate doesn't make sense? I noticed you connected the heat flow rate ...

10 mois il y a | 0

A répondu
I get the following error; "Caused by: Variable 'fan_area' has been deleted from base workspace." in Simscape
The parameters of this model are all kept in the Simulink model workspace. So the fact that it's looking for things in the base...

10 mois il y a | 0

A répondu
Modeling of a bypass valve in the two-phase structure
If "opening fraction is zero throughout" and the valve let through a significant fraction of the total mass flow, you have too m...

10 mois il y a | 0

A répondu
How can I implement vanes (IGVs) on compressor unit in Simscape?
You are right about the compressor block: it doesn't support vanes as an input. I can think of one workaround, by using a 3D lo...

10 mois il y a | 0

A répondu
how can i get the specific heat at constant volume for two phase fluid Water/Steam
Hi Mario, You should be able to calculate Cv from Cp, temperature, thermal expansion coeffcient, density, and bulk modulus. Al...

10 mois il y a | 0

A répondu
Is it possible to calculate the "hydraulic-translation-multibody"-system backwards?
I would agree with you that the valve position couldn't be calculated the way you described. The force, though, can be found by...

11 mois il y a | 0

A répondu
Variable Kv valve model
My suggestion would be to modify the code of a local restriction block, and move the Discharge Coefficient (Cd) from "parameter"...

11 mois il y a | 0

A répondu
Pressure-flow characteristic for a 4-Way Directional Valve
I believe the pressure differentials refer to p.P-p.A, p.P-p.B, p.A-p.T, p.B-p.T. The flow direction is defined in the save way...

11 mois il y a | 0

A répondu
How to add radiation heat transfer to 3-Zone Pipe (2P) ?
This may be a workaround: May the convective transfer coefficient in the 3-zone pipe ridiculously large, so it results in almos...

11 mois il y a | 0

A répondu
How do I change the default settings (water) in Thermal Liquid (TL) Settings in my Simulink model?
Use the Thermal Liquid Settings block in Simscape / Foundation Library / Thermal Liquid / Utilities: https://www.mathworks.com/...

11 mois il y a | 0

A répondu
Heat Excahnger TL Modeling Liquid Cooling
Looks like a follow-up on question https://www.mathworks.com/matlabcentral/answers/1624290-simulink-thermal-liquid-simulation?s_...

11 mois il y a | 0