I am an Associate Application Support Engineer at MathWorks.

My areas of interest are Deep Learning and Computer Vision.

DISCLAIMER: The advice and opinions here are my own and not in any way that of MathWorks.

Solved

Interpolator

You have a two vectors, a and b. They are monotonic and the same length. Given a value, va, where va is between a(1) and a(end...

8 jours ago

Answered

Having trouble rewriting a DICOM file with metadata: converting table to structure

Hi Johnathan, Your issue may be solved this way: % If 'T' is the variable holding the table, C = table2cell(T); C = C'; C...

Having trouble rewriting a DICOM file with metadata: converting table to structure

Hi Johnathan, Your issue may be solved this way: % If 'T' is the variable holding the table, C = table2cell(T); C = C'; C...

20 jours ago | 2

Answered

How can I speed up nested loops?

Hi Yeray, I have a few suggestions for this vectorization, In the calculation of 'A' and 'B', the functions sind and cosd ca...

How can I speed up nested loops?

Hi Yeray, I have a few suggestions for this vectorization, In the calculation of 'A' and 'B', the functions sind and cosd ca...

27 jours ago | 0

Answered

Error: "Subscripted assignment dimension mismatch."

I think you need to clear all variables and close all figures before running this code. Your code is working fine on my MATLAB ...

Error: "Subscripted assignment dimension mismatch."

I think you need to clear all variables and close all figures before running this code. Your code is working fine on my MATLAB ...

environ un mois ago | 0

Answered

How can i change places to pixel values(black ones to white, white ones to black) of binary image?

Hey Zuy, I don't think you can concatenate statements in matlab using '&&' - that is a logical operator, the kind that is used ...

How can i change places to pixel values(black ones to white, white ones to black) of binary image?

Hey Zuy, I don't think you can concatenate statements in matlab using '&&' - that is a logical operator, the kind that is used ...

environ un mois ago | 0

Answered

Replacing for loop in order to decrease run time

Hi Bastiaan, I think this way you can solve it. Below is how yo D = A(1, end-1) - B(1, end-1); D = [0; D] % ';' Assuming...

Replacing for loop in order to decrease run time

Hi Bastiaan, I think this way you can solve it. Below is how yo D = A(1, end-1) - B(1, end-1); D = [0; D] % ';' Assuming...

environ un mois ago | 0

Answered

fprint() to save uint8 in .txt file

You may save it using the '%d' formatting operator and save it line by line to a text file. Use '\n' for moving to the next line...

fprint() to save uint8 in .txt file

You may save it using the '%d' formatting operator and save it line by line to a text file. Use '\n' for moving to the next line...

environ un mois ago | 0

Answered

Question about Goodness of Fit

Please refer to the documentation on nlinfit which explains each of the output arguments in depth. https://in.mathworks.com/hel...

Question about Goodness of Fit

Please refer to the documentation on nlinfit which explains each of the output arguments in depth. https://in.mathworks.com/hel...

2 mois ago | 0

Answered

Need help with "??? Undefined function or variable 'limit_2'. The first assignment to a local variable determines its class."

codegen fun -args {zeros(i,i),1} -nargout 3 I think you have forgotten to pass the third argument into the function. This leave...

Need help with "??? Undefined function or variable 'limit_2'. The first assignment to a local variable determines its class."

codegen fun -args {zeros(i,i),1} -nargout 3 I think you have forgotten to pass the third argument into the function. This leave...

2 mois ago | 1

| accepted

Answered

How can I plot multiple rectangles (or circles) using the rectangle function without using a for loop?

I don't think there is a way to 'vectorize' this code, you can't eliminate this for loop and achieve much of a speed up. But how...

How can I plot multiple rectangles (or circles) using the rectangle function without using a for loop?

I don't think there is a way to 'vectorize' this code, you can't eliminate this for loop and achieve much of a speed up. But how...

2 mois ago | 1

| accepted

Answered

Generalization of Catalan's conjecture

You may explore File Exchange for solutions or related code from which you can build your own solution. If you are attempting t...

Generalization of Catalan's conjecture

You may explore File Exchange for solutions or related code from which you can build your own solution. If you are attempting t...

2 mois ago | 0

| accepted

Answered

Function 'range_calculator' has already been declared within this scope.

You may try removing the initialization of 'g' which is the first line in your function. In matlab, if you have code above the f...

Function 'range_calculator' has already been declared within this scope.

You may try removing the initialization of 'g' which is the first line in your function. In matlab, if you have code above the f...

2 mois ago | 0

| accepted

Answered

Classification learner - Confusion matrix

Hi EK, You are correct about False Discovery Rates being the same as False Positives. However, I'm not sure which metric you m...

Classification learner - Confusion matrix

Hi EK, You are correct about False Discovery Rates being the same as False Positives. However, I'm not sure which metric you m...

2 mois ago | 0

Answered

Finding adjacent pixels of a certain color around a blue pixel in an image

Hi Michael, Here's one way to do it:- Create 2 masks, one identifying all blue pixels and another identifying all pixels adja...

Finding adjacent pixels of a certain color around a blue pixel in an image

Hi Michael, Here's one way to do it:- Create 2 masks, one identifying all blue pixels and another identifying all pixels adja...

3 mois ago | 0

Answered

Dice roll sum and its corresponding probabilities

Have a look at the following post regarding Homework Questions on this forum: https://in.mathworks.com/matlabcentral/answers/86...

Dice roll sum and its corresponding probabilities

Have a look at the following post regarding Homework Questions on this forum: https://in.mathworks.com/matlabcentral/answers/86...

3 mois ago | 0

Answered

Sum specific values from a matrix

You may use logical indexing as follows: cond1 = K(:,2)>=5 & K(:,2)<9; %these are logical indices to select out your given rang...

Sum specific values from a matrix

You may use logical indexing as follows: cond1 = K(:,2)>=5 & K(:,2)<9; %these are logical indices to select out your given rang...

3 mois ago | 0

Answered

resizing an array in MATLAB

I think what you're looking for is a way to index. I'm sure you'll find the answer here: https://in.mathworks.com/help/matlab/l...

resizing an array in MATLAB

I think what you're looking for is a way to index. I'm sure you'll find the answer here: https://in.mathworks.com/help/matlab/l...

3 mois ago | 0

Answered

How to plot a line with repeated values of x?

Looks like you want the plots to appear side-by-side. Maybe you can concatenate 'PC1', 'PC2' and 'PC3' into one longer vector,...

How to plot a line with repeated values of x?

Looks like you want the plots to appear side-by-side. Maybe you can concatenate 'PC1', 'PC2' and 'PC3' into one longer vector,...

3 mois ago | 0

Answered

How expanding 2 columns matrix (with each row having edges of a specific range) into a vector without for loop?

Hey, Here's something I came up with, you may try it out to determine if it works with your data. It's not very straightfor...

How expanding 2 columns matrix (with each row having edges of a specific range) into a vector without for loop?

Hey, Here's something I came up with, you may try it out to determine if it works with your data. It's not very straightfor...

4 mois ago | 1

| accepted

Answered

How to programmatically adjust the font size of the editor and command window?

Hi Michele, You may use MATLAB's settings object to set and modify MATLAB preferences on the fly. Have a look at the doc linke...

How to programmatically adjust the font size of the editor and command window?

Hi Michele, You may use MATLAB's settings object to set and modify MATLAB preferences on the fly. Have a look at the doc linke...

4 mois ago | 0

| accepted

Answered

Solutions of genetic algorithm and globalsearch versus fmincon

Hi Rui, I assume that after ga/globalsearch have terminated with a solution, you are calling fmincon with the 'hessian' ou...

Solutions of genetic algorithm and globalsearch versus fmincon

Hi Rui, I assume that after ga/globalsearch have terminated with a solution, you are calling fmincon with the 'hessian' ou...

4 mois ago | 0

Answered

Is it possible to split the Command Window into continuous sub Command Windows?

One can split the editor window, but MATLAB doesn't support splitting the command window the way you described, at the moment.

Is it possible to split the Command Window into continuous sub Command Windows?

One can split the editor window, but MATLAB doesn't support splitting the command window the way you described, at the moment.

4 mois ago | 0

| accepted

Answered

How to convert objection function into maths?

You may run the optimization by calling 'bayesopt' function on 'minfn'. See the doc linked below for more details, the examples ...

How to convert objection function into maths?

You may run the optimization by calling 'bayesopt' function on 'minfn'. See the doc linked below for more details, the examples ...

4 mois ago | 0

Answered

Converting .CSV file element to double

You may try setting options for the readtable function as outlined in this doc: https://in.mathworks.com/help/matlab/ref/readta...

Converting .CSV file element to double

You may try setting options for the readtable function as outlined in this doc: https://in.mathworks.com/help/matlab/ref/readta...

4 mois ago | 0

| accepted

Answered

How I can use the matlab coder to convert my matlab code to C language? what is the MEX function can any body explain for me.

MEX files are like an interface between matlab and code written in C/C++ or FORTRAN. You can use the 'mex' command to compile so...

How I can use the matlab coder to convert my matlab code to C language? what is the MEX function can any body explain for me.

MEX files are like an interface between matlab and code written in C/C++ or FORTRAN. You can use the 'mex' command to compile so...

4 mois ago | 0

Answered

Fuzzy Logic cannot delete input and output variables in Matlab 2018b

Yes, this appears to be a bug. The developers were already notified of this issue and it was fixed in R2019a.

Fuzzy Logic cannot delete input and output variables in Matlab 2018b

Yes, this appears to be a bug. The developers were already notified of this issue and it was fixed in R2019a.

4 mois ago | 0

Answered

Calculate mean of an array in time windows.

I'm not sure how you have arranged your data within the matrix 'EEG' - which dimensions correspond to which attributes? I not...

Calculate mean of an array in time windows.

I'm not sure how you have arranged your data within the matrix 'EEG' - which dimensions correspond to which attributes? I not...

4 mois ago | 0

Answered

How to perform Indexing

Hi Larissa, The goal of this forum is to help solve generic MATLAB questions, not to provide full solutions to anybody's homew...

How to perform Indexing

Hi Larissa, The goal of this forum is to help solve generic MATLAB questions, not to provide full solutions to anybody's homew...

4 mois ago | 0

Answered

How to write 2 functions both in 2 variables that will be the objective functions of a Multi-objective Genetic Algorithm?

Hi Andrea, I think your approach with the 'multiobjective' function is wrong. The input 'FitnessFunction' should be returnin...

How to write 2 functions both in 2 variables that will be the objective functions of a Multi-objective Genetic Algorithm?

Hi Andrea, I think your approach with the 'multiobjective' function is wrong. The input 'FitnessFunction' should be returnin...

5 mois ago | 1

Answered

Finding Shortest Path Without Crossing Restricted Areas

I suggest implementing the Dijkstra's algorithm for this problem. An explanation is found here: https://en.wikipedia.org/wiki/Di...

Finding Shortest Path Without Crossing Restricted Areas

I suggest implementing the Dijkstra's algorithm for this problem. An explanation is found here: https://en.wikipedia.org/wiki/Di...

5 mois ago | 0