Réponse apportée
objective function in case of genetic algorithm for dynamic optimization
To define the objective function for your genetic algorithm, you can follow these steps: Define the decision variables: In your...

presque 2 ans il y a | 1

Réponse apportée
Having some error while using doLayout, will appreciate any help. Incorrect number or types of inputs or outputs for function 'doLayout'.
Hi, The function dolayout has been removed with MATLAB R2022b. This may be the cause of the error that you are getting. Instead...

presque 2 ans il y a | 0

Réponse apportée
Failed to open any .m file in Matlab, cmd pops out shows 'The system cannot find the path specified.' 无法在MATLAB中打开任何.m脚本和函数文件，点击打开后弹出cmd弹窗并显示“系统找不到指定的路径”。尝试过重装Matlab，工作路径没出错。
This might happen if you have not added the path to your MATLAB workspace. Please try the below steps: 1). Open MATLAB and na...

presque 2 ans il y a | 0

Réponse apportée
How to generate code in MATLAB for randomly oriented short fibers?
Hi, Generating code in MATLAB for randomly oriented short fibers typically involves defining the geometry of the fibers and ran...

presque 2 ans il y a | 0

Réponse apportée
How to add impulsive noise to a signal in MATLAB
Hi, To add impulsive noise to a signal in MATLAB, you can use the imnoise function, which can add different types of noise to a...

presque 2 ans il y a | 1

Réponse apportée
Change pixels to mm in axes in plot
Hi, Assuming that you are using the imshow method as shown in the code snippet, then that may not be the correct way of using i...

presque 2 ans il y a | 0

Réponse apportée
Suggestion for purchase an IP camera
Hi, Many manufacturers provide IP cameras that are compatible with MATLAB. The IP cameras from the following manufacturers have...

environ 2 ans il y a | 0

Réponse apportée
Can anyone help me in taking plot between threshold voltage and thickness of AlN
Hi, The code is generating a plot which is linearly decreasing, but I assume that you are expecting a different type of graph...

environ 2 ans il y a | 0

Réponse apportée
I need help plotting points with * symbol at intervals equal to Ts = 1/fs = 1/7s (Here is my code)?
Hi, Based on the code that you have provided, the sampling rate can be set by changing the value of f to 7. You can add * mar...

environ 2 ans il y a | 0

Réponse apportée
Smoothing the time series data (x-axis is time in seconds, y-axis is Pressure)
Hi, The usage of FFT to filter the signal depends on the signal that is being processed. You can refer to the below link to se...

environ 2 ans il y a | 0