Réponse apportée
Second order coupled differential equation
X0 = [0; 0; 0]; % initial conditions r = linspace(1, 50, 100); % resistance range tspan = linspace(0,100, 100); freq_vector...

16 jours il y a | 0

| A accepté

Réponse apportée
Use of Fmincon for stress relax data
I suggest you read the examples for the different suitable solvers. They will show you exactly how to proceed for your case. Ma...

17 jours il y a | 0

Réponse apportée
use of pdepe for a space-dependent diffusivity
First: Don't name the vector "diff" since "diff" is an internal MATLAB function. Name it D, e.g. Second: To get the correct val...

18 jours il y a | 0

| A accepté

Réponse apportée
If I have an array and I need to find an element in the array how do I go about it?
Compute 100*states(:,1)+10*states(:,2)+states(:,3) and use "find" to compare with C.

18 jours il y a | 1

Réponse apportée
Solve a differential equation and determine when it gets close to steady state
You can use an event function for the ODE integrator and stop integration when abs(dy/dt) (in your case abs(0.1 * (c-20) * (23-c...

18 jours il y a | 0

Réponse apportée
the degradation of ozone in aqueous solutions (water). When I plot the all three components, the plot stays at the 0 value for all components.
There seems to be a singularity in the solution at t approximately 320. ProjectOzone() function ProjectOzone clc ki = 7e-3;...

19 jours il y a | 0

Réponse apportée
The code below runs nonstop, and the results are not shown. why is that?
The code below runs nonstop, and the results are not shown. why is that? "solve" won't succeed for your system of equations bec...

20 jours il y a | 0

Réponse apportée
Create number of for loops depending on size of N
The N columns of the resulting C-matrix contain i_first, i_second,... imax = 8; N = 4; i_average = (sum(0:N-1)/N+sum(imax:-1:...

20 jours il y a | 0

Réponse apportée
How to make Matlab recognize that an expression rewritten by using subexpr() is equal to the original expression?
You have to resubstitute sigma by (a+b+c+d+e)^(1/2) in x_2 to compare with x: syms a b c d e f x x = a + (a+b+c+d+e)^(1/2) + c...

21 jours il y a | 0

Réponse apportée
plot the output c(t) using mathlab and show setting time on you graphf
Use "fplot" as done in your code above.

21 jours il y a | 0

Réponse apportée
Describe the solution trajectory of differential systems with mixed time-varying delay
To write your equations as a system of delay differential equations that can be handled by a MATLAB solver, set x3 = integral_{...

21 jours il y a | 1

| A accepté

Réponse apportée
Plot between Nu vs Ra
Replace Ra_values = 10:100:100000; by Ra_values = (10:100:100000).';

21 jours il y a | 0

Réponse apportée
Resetting only a section of my state during event driven ode45 simulation
After the event has been triggered, control is returned to the calling program. If you want to continue integration with the e...

21 jours il y a | 1

Réponse apportée
Index exceeds the number of array elements. Index must not exceed 1.
path_length_BS_IRS_reflect_UE(i) does not exist for i > 1 because path_length_BS_IRS_reflect_UE is a scalar value, namely 223.60...

21 jours il y a | 0

Réponse apportée
Dot indexing is not supported for variables of this type.
Test before your loop % Loop through each entry in the list and extract data for i = 1:numEntries dt(i) = dateti...

22 jours il y a | 0

| A accepté

Réponse apportée
How do I know what method Matlab is using when plotting ltiview?
I don't know Itiview nor risetime, but isn't there a literature link in the documentation for the function you are using ? If ...

22 jours il y a | 0

Réponse apportée
How to solve algebraic equations for different values of variables ?
% Solve the equation eqn = Ac.*I.*eta-m.*c.*(Te-Ti)==0 for i=1:numel(eqn) s = solve(eqn(i),Te); S(i) = vpa(s(s>=0)); en...

23 jours il y a | 0

Réponse apportée
function file used with 2 Matrices as input
You are not allowed to use the same name for the function and an output array. Thus rename one of them. And ln_AOU as output pa...

23 jours il y a | 0

| A accepté

Réponse apportée
Solving a linear programming problem uising linprog
A = -[110 205 160 160 420 260;... 4 32 13 8 4 14;... 2 12 54 285 22 80]; b = -[2000; 55; 800]; Aeq = []; beq = ...

24 jours il y a | 1

| A accepté

Réponse apportée
BVP Error, help with explaination
The solver is no longer able to capture the steep gradient of your solution at x=0. Look at sol.x in the last step of the cont...

24 jours il y a | 0

Réponse apportée
Data type symfun (code problem)
If your MATLAB release throws an error (R2024a does not as you can see above), try [n(x) d(x)] = numden(df(x)) instead of [n ...

24 jours il y a | 1

Réponse apportée
The estimation error is strangely obtained from Simpson's 1/3 rule...
syms a b c d e real syms t real f(t) = a*t^5 + b*t^4 + c*t^3 + d*t^2 + e*t; s = 0; i = -1/2; while i < 959.5 i = i + ...

24 jours il y a | 1

| A accepté

Réponse apportée
V2H Optimization: No feasible solution found
Use energyStorage = optimconstr(T); energyStorage(1) = BSS_SOC(1) == 0; energyStorage(2:T) = BSS_SOC(2:T) == BSS_SOC(1:T-1) -...

25 jours il y a | 1

| A accepté

Réponse apportée
Need to solve the following equation with three knowns and 2 unknowns.
H_BM = rand(100,1); g_mean = rand(100,1); Wi = rand(100,1); Hi = H_BM; gi = g_mean; x = Hi.*gi; y = Wi + Hi.*gi; fitl...

26 jours il y a | 1

Réponse apportée
Why does Matlab not recognize fieldnames function?
You overwrite the "fieldnames" function by setting it to a variable value: fieldnames = fieldnames(results.digitalMap);

27 jours il y a | 0

| A accepté

Réponse apportée
Simulate Fick's 1st and 2nd laws of mass diffusion.
The correct update for inner grid points is C_new(i,j) = C_old(i,j) + dt * (D_x*(C_old(i-1,j)-2*C_old(i,j)+C_old(i+1,j))/dx^2 +...

28 jours il y a | 0

| A accepté

Réponse apportée
Indices shown in plot are off
My guess is that the x-axis has a resolution of 10.

29 jours il y a | 0

Réponse apportée
issue in calculation of wave speed
The below code will at least give you the correct update of the solution. You don't initialize "half_max_positions" ; that's wh...

29 jours il y a | 0

Réponse apportée
Minimize difference between two data sets
Use [output] = [method](@(AB) my_func(AB(1),AB(2)), [A B]) instead of [output] = [method](@(A,B) my_func(A,B), [A B])

29 jours il y a | 0

| A accepté

Charger plus