A répondu
Raspberry Pi Simulink Communication Error
Can you try using the numeric IP address of the board instead of the hostname 'simPi'? Or to be more clear, use whatever you are...

presque 11 ans il y a | 0

A répondu
How to access RaspberryPi I2c in Simulink
There are no Simulink blocks to access I2C bus in the Raspberry Pi support package. However, that does not mean you can't do it....

environ 11 ans il y a | 2

A répondu
Raspberry Pi support in Simulink - anyone tried it?
The Raspberry Pi support package does not support continuous time solvers as you already found out. What is the application area...

environ 11 ans il y a | 0

| A accepté

A répondu
Using target for hardware blocks, How can I send data from host machine as input to the model which is already downloaded and run in beagleboard?
1. Use 'From Workspace' block. Save the data you want BeagleBoard to use into MATLAB workspace. Use 'From Workspace' block to fe...

plus de 11 ans il y a | 0

A répondu
Beagleboard USB input block code generation
Yes. It is possible to use data stored in a USB memory stick on BeagleBoard. In R2012a and R2012b, Simulink comes with a BeagleB...

plus de 11 ans il y a | 1

A répondu
Matlab and Simulink on Beagle Bone
The BeagleBone is not officially supported. However, I tried the BeagleBoard xM support package with BeagleBone. If you load an ...

presque 12 ans il y a | 1

A répondu
Running Simulink-generated code from the Beagleboard without a host computer
The executable generated from a model is always saved on the BeagleBoard. The exact location to the executable is: /home/ubun...

presque 12 ans il y a | 0

A répondu
BeagleBoard I/O Pins code generation
The MATLAB R2012a release has a downloadable support package for BeagleBoard (installed by executing "targetinstaller" on the MA...

presque 12 ans il y a | 1