1 631 total contributions since 2005

Matt is currently employed at Sunstate Risk Assessments, LLC in the beautiful Florida panhandle. He holds degrees in physics and mechanical engineering.

Professional Interests: MATLAB, C++, ANSYS

Answered

change the font size of the current axis

x = rand(10,10); y = rand(10,10); plot(x,y); set(gca,'FontSize',20)

change the font size of the current axis

x = rand(10,10); y = rand(10,10); plot(x,y); set(gca,'FontSize',20)

12 mois ago | 11

| accepted

Submitted

Fast View Factor Computation

Computes the view factors for two 3D planer polygons

environ 3 ans ago | 4 downloads |

Answered

Display rational numbers using fprintf

T = 1/3; fprintf('The number is: %s\n',strtrim(rats(T)))

Display rational numbers using fprintf

T = 1/3; fprintf('The number is: %s\n',strtrim(rats(T)))

presque 7 ans ago | 0

| accepted

Answered

Faster way of writing this code: (finding index)

That code does not return an index, but it does return the number of values in vector quantiles that are smaller than input.

Faster way of writing this code: (finding index)

That code does not return an index, but it does return the number of values in vector quantiles that are smaller than input.

presque 7 ans ago | 0

Answered

Breaking Quotes for Printmat

If I were you I would just use FPRINTF to print your array. I would offer you an example, but I don't know what you mean by "Is ...

Breaking Quotes for Printmat

If I were you I would just use FPRINTF to print your array. I would offer you an example, but I don't know what you mean by "Is ...

presque 7 ans ago | 0

Answered

Create a matrix with Special properties

V0 = 10; a = 5; V1 = V0 + randi([-100 140]) + a; V2 = V1 + randi([-100 140]) + a; matrix = [V0,randi([-100 140]),a...

Create a matrix with Special properties

V0 = 10; a = 5; V1 = V0 + randi([-100 140]) + a; V2 = V1 + randi([-100 140]) + a; matrix = [V0,randi([-100 140]),a...

presque 7 ans ago | 0

| accepted

Answered

index exceeds matrix dimention

What is the Q doing there? We need to see code that we can copy/paste and *_it will run_*. So please fill in the missing varia...

index exceeds matrix dimention

What is the Q doing there? We need to see code that we can copy/paste and *_it will run_*. So please fill in the missing varia...

presque 7 ans ago | 0

Answered

A simple question about working with array matrix and converting a column to multiple columns

reshape(X,50,12) Or perhaps reshape(X,12,50).'

A simple question about working with array matrix and converting a column to multiple columns

reshape(X,50,12) Or perhaps reshape(X,12,50).'

presque 7 ans ago | 1

| accepted

Answered

adding breakpoint to program slows it down a factor of 250x

It makes sense to me that MATLAB would be slower when you are debugging. So what is the big deal? You won't be in debug mode o...

adding breakpoint to program slows it down a factor of 250x

It makes sense to me that MATLAB would be slower when you are debugging. So what is the big deal? You won't be in debug mode o...

presque 7 ans ago | 0

| accepted

Answered

I need help with the Matlab R2007b commands

If you have MATLAB installed then you can look at the documentation by typing: docsearch('image processing toolbox') The...

I need help with the Matlab R2007b commands

If you have MATLAB installed then you can look at the documentation by typing: docsearch('image processing toolbox') The...

presque 7 ans ago | 0

Answered

how to enable rotate3d for guide axes?

Use the command: rotated3d on After the code that plots the surf.

how to enable rotate3d for guide axes?

Use the command: rotated3d on After the code that plots the surf.

presque 7 ans ago | 0

Answered

Problem Saving Workspace - No Error Message

Of course, it would be immenseley helpful, and might actually allow a solution to be put forward, if you describe *in detail* wh...

Problem Saving Workspace - No Error Message

Of course, it would be immenseley helpful, and might actually allow a solution to be put forward, if you describe *in detail* wh...

presque 7 ans ago | 0

Answered

Concatenate cells: making column and row headers

row={'cat1'; 'cat2'; 'cat3'}; col={'mouse1' 'mouse2' 'mouse3'}; figure t = uitable('Data',[],... 'Colu...

Concatenate cells: making column and row headers

row={'cat1'; 'cat2'; 'cat3'}; col={'mouse1' 'mouse2' 'mouse3'}; figure t = uitable('Data',[],... 'Colu...

presque 7 ans ago | 0

Answered

[GUI] How do you fill a Listbox with documents from a specific folder

The most basic example... D = dir; uicontrol('style','list',... 'units','pix',... 'pos',[20 20...

[GUI] How do you fill a Listbox with documents from a specific folder

The most basic example... D = dir; uicontrol('style','list',... 'units','pix',... 'pos',[20 20...

presque 7 ans ago | 0

| accepted

Answered

About matrix: how to make matrix binary (0 and 1)

S = dec2bin((1:32).') % If a string is o.k. N = S - '0' % If you need a numeric matrix.

About matrix: how to make matrix binary (0 and 1)

S = dec2bin((1:32).') % If a string is o.k. N = S - '0' % If you need a numeric matrix.

presque 7 ans ago | 0

Answered

i want to plot the graph between the probability of false alarm and probability of detection

# Format your code. # Give a description of what it does and what is wrong # State _clearly_ what you need it to do.

i want to plot the graph between the probability of false alarm and probability of detection

# Format your code. # Give a description of what it does and what is wrong # State _clearly_ what you need it to do.

presque 7 ans ago | 0

Answered

How can i create a standard matlab template for new programs

You could put that code in an m-file then use COPYFILE to copy it to a new m-file, including the intended name. Say your abov...

How can i create a standard matlab template for new programs

You could put that code in an m-file then use COPYFILE to copy it to a new m-file, including the intended name. Say your abov...

presque 7 ans ago | 0

| accepted

Answered

what is difference in cell and structure plz tell me with example

There is good documentation on this, did you read: doc cell doc struct Here is a cell array: C{1} = magic(3)...

what is difference in cell and structure plz tell me with example

There is good documentation on this, did you read: doc cell doc struct Here is a cell array: C{1} = magic(3)...

presque 7 ans ago | 2

Answered

Error in Quad, suggestions required ?

Don't mix inlines with symbolics this way. syms E m R T f1 = int((0.99954.*E + ((0.58058-0.044967.*m).*R.*T))./(E + (2...

Error in Quad, suggestions required ?

Don't mix inlines with symbolics this way. syms E m R T f1 = int((0.99954.*E + ((0.58058-0.044967.*m).*R.*T))./(E + (2...

presque 7 ans ago | 0

Answered

plot of specified data

a=[1;1;1;1;2;2;2;3;3;3;3;4;4;4;4;4;5;5;5]; b=[20;21;22;24;20;22;24;21;19;20;22;23;24;19;23;19;24;23;22]; c=[2;5;1;3;1;3;...

plot of specified data

a=[1;1;1;1;2;2;2;3;3;3;3;4;4;4;4;4;5;5;5]; b=[20;21;22;24;20;22;24;21;19;20;22;23;24;19;23;19;24;23;22]; c=[2;5;1;3;1;3;...

presque 7 ans ago | 0

| accepted

Answered

Quick way to find the point where a vector changes from increasing to decreasing.

D = [10,9,7,5,3,2,1,2,3,5,7]; V = [0 diff(D)>0] % Indicates sign of difference S = find(V,1,'first') % First index whe...

Quick way to find the point where a vector changes from increasing to decreasing.

D = [10,9,7,5,3,2,1,2,3,5,7]; V = [0 diff(D)>0] % Indicates sign of difference S = find(V,1,'first') % First index whe...

presque 7 ans ago | 0

| accepted

Answered

Quotes around the name of the function

Typically, you want to pass a handle to a function, not a string. fsovle(@myfun,x0) % Notice the @ symbol --> a function h...

Quotes around the name of the function

Typically, you want to pass a handle to a function, not a string. fsovle(@myfun,x0) % Notice the @ symbol --> a function h...

presque 7 ans ago | 0

| accepted

Answered

How to solve a simple if loop

# There is no such thing as an IF loop. # IF statements do not filter elements out of an array. # MATLAB does not use a THEN k...

How to solve a simple if loop

# There is no such thing as an IF loop. # IF statements do not filter elements out of an array. # MATLAB does not use a THEN k...

presque 7 ans ago | 1

| accepted

Answered

Aborting callback execution in GUI - Drawnow error

I am not sure why you are using errors to try to cancel an operation. It seems simpler to just have the cancel button set a fla...

Aborting callback execution in GUI - Drawnow error

I am not sure why you are using errors to try to cancel an operation. It seems simpler to just have the cancel button set a fla...

presque 7 ans ago | 0

| accepted

Answered

GUI pop-up menu and push buttons

There are many ways to do this. Here is a simple example that may provide a skeleton for you to fill out. function [] = ...

GUI pop-up menu and push buttons

There are many ways to do this. Here is a simple example that may provide a skeleton for you to fill out. function [] = ...

presque 7 ans ago | 0

Answered

Is there a way to label a plot with angled text?

You might give <http://www.mathworks.com/matlabcentral/fileexchange/27812-rotate-x-axis-tick-labels this file exchange file a tr...

Is there a way to label a plot with angled text?

You might give <http://www.mathworks.com/matlabcentral/fileexchange/27812-rotate-x-axis-tick-labels this file exchange file a tr...

presque 7 ans ago | 0

| accepted

Answered

[co,fig] = gcbo does not work in slider listener

Use FINDALL. fig = findall(0,'type','figure','tag','myfiguretag')

[co,fig] = gcbo does not work in slider listener

Use FINDALL. fig = findall(0,'type','figure','tag','myfiguretag')

presque 7 ans ago | 0

Answered

Hello, I am trying to fit some data points with an exponential equation.

>> X = sort(rand(1,10)*30); % Say this is our x data. >> Y = 14*exp(3*X); % Say this is _unknown_ equation. >> pp = po...

Hello, I am trying to fit some data points with an exponential equation.

>> X = sort(rand(1,10)*30); % Say this is our x data. >> Y = 14*exp(3*X); % Say this is _unknown_ equation. >> pp = po...

presque 7 ans ago | 0

Answered

Convert (x,y) data into a function y => f(x)

You could use POLYFIT, or the curve fitting toolbox or a simple interpolation. >> x = 0:.25:5; >> y = x.^2; >> f = ...

Convert (x,y) data into a function y => f(x)

You could use POLYFIT, or the curve fitting toolbox or a simple interpolation. >> x = 0:.25:5; >> y = x.^2; >> f = ...

presque 7 ans ago | 1

| accepted

Answered

regexprep - may the replacement string contain a variable?

Does this work? regexprep(str, '(xx\(i,)BE(\))', ['$1',q,'$2'] )

regexprep - may the replacement string contain a variable?

Does this work? regexprep(str, '(xx\(i,)BE(\))', ['$1',q,'$2'] )

presque 7 ans ago | 0

| accepted