Réponse apportée
What means real-time kernel concerning the real-time sync block?
The parameter _Maximum missed ticks_ has a meaning in Normal Mode only. In Normal Mode, Simulink runs the uncompiled model and s...

presque 13 ans il y a | 1

| A accepté

Réponse apportée
Error while connecting to realtime target
For serial port communication, please use Packet Output or Stream Output blocks, depending on your data format. You are correct ...

presque 13 ans il y a | 2

| A accepté

Réponse apportée
Video processing model can't be compiled by real-time windows target
It is not possible to use the "From Video Device" block with Real-Time Windows Target. Although this block generates code, the g...

presque 13 ans il y a | 1

Réponse apportée
I have a pci card，how can I used it in rtwintgt？
There is no universal solution or advice for using an unsupported PCI board with Real-Time Windows Target. If you need an advice...

presque 13 ans il y a | 0

Réponse apportée
Need a guide for using vrtracer and/or 3D World Editor
In most cases, there is no need to modify the virtual world you want to use for object tracing. So you don't need to care about ...

presque 13 ans il y a | 0

| A accepté

Réponse apportée
TCP/IP communication using Simulink- blocs (send/receive) under Real- Time Windows Target
The IP Send and IP Receive blocks are not usable in Real-Time Windows Target. Instead, please try to use blocks from Real-Time W...

environ 13 ans il y a | 1

| A accepté

Réponse apportée
Controlling the Simulink model run status through external API
Code running in real time generally cannot be paused. That would contradict its purpose to run in real time. For example, if the...

environ 13 ans il y a | 0

| A accepté

Réponse apportée
Problem running real time windows target
The Real-Time Windows Target does not include precompiled libraries for SimMechanics 2nd generation in R2012b and R2013a. This i...

environ 13 ans il y a | 0

Réponse apportée
Real-Time Windows Target: rtwintgt -setup claims to be 'successful', but rtwho then reveals that the kernel hasn't been installed.
This is a known problem with R2012b and Windows 8. This is caused by a late change in Windows 8 that prevents correct initializa...

environ 13 ans il y a | 0

| A accepté

Réponse apportée
How to initialize Simulink Data Store Memories with Real Time Windows Target
You are correct that this does not work and it should. I'm filing a bug record for this. To work around the problem, you can ...

environ 13 ans il y a | 2

Réponse apportée
Correct SampleTime for PacketOutput to Virtual COM-Port
If you want to send out 54 bytes 50 times per seconds, then it is best to send one packet consisting of those 54 bytes with a sa...

environ 13 ans il y a | 1

| A accepté

Réponse apportée
Slow Animation due VR Tracer
The simulation gets slower because of increasing number of objects in the virtual world. If you want to speed up the simulation,...

environ 13 ans il y a | 0

Réponse apportée
how to obtain the location of a point with respect to the global coordinate system in vrml
If you want to read global coordinates, it is recommended to wrap the object by a Transform node. Then, it is possible to read t...

plus de 13 ans il y a | 0

Réponse apportée
The "Analog Input" block has timed out while trying to synchronize to real-time kernel
This is likely because the real-time kernel runs at slower rate than it should or has not started at all. The most frequent caus...

plus de 13 ans il y a | 0

Réponse apportée
Real-Time Windows Target (now Simulink Desktop Real-Time) and UDP?
You should use the *Packet Input*, *Packet Output*, *Stream Input*, *Stream Output* blocks for UDP communication. The choice of ...

plus de 13 ans il y a | 0

| A accepté

Réponse apportée
Simulink is already connected to another real-time model
This situation may happen if the real-time code terminates in some unusual way and does not properly disconnect from Simulink. T...

plus de 13 ans il y a | 1

| A accepté

Réponse apportée
Black area when opening 3D World Editor
Please try switching to software OpenGL. Type opengl software as the first command after starting MATLAB, then open 3D W...

plus de 13 ans il y a | 0

| A accepté

Réponse apportée
Real-Time Synchronization dose not pause, please help
What you are trying to do is somewhat against the purpose of real-time synchronization. If you have your model connected to a re...

plus de 13 ans il y a | 3

| A accepté

Réponse apportée
VRML 3D scene from MATLAB command prompt
You can create a new VRML world from scratch like this: w = vrworld(''); % create an empty world and open it open(w); ...

plus de 13 ans il y a | 1

| A accepté

Réponse apportée
s-function with OpenGL
You may want to try the <http://mathworks.com/products/3d-animation Simulink 3D Animation> product. It can save you from low-lev...

presque 15 ans il y a | 0

| A accepté

A soumis


DDE Library for Simulink
Simulink library for DDE communication.

presque 23 ans il y a | 2 téléchargements |

4.0 / 5