Andy Bartlett

Last seen: Today | Actif depuis 2015

Statistiques

All

Content Feed

A répondu
Which function can I use to get the information of simulink.AliasType/NumericType in M file?
First you need to have access to the Alias Type as a variable. If you only have the name of the alias type used by a model, the...

environ 18 heures il y a | 0

A répondu
after converting the model into fixed point the rms value outside the sub system and after conversion are different even after using the fixed point tool iterative method
Behavioral Requirements are Key The key question is whether the system meets its behavioral requirements. I applied Data Type ...

20 jours il y a | 0

A répondu
Integer rounding mode set to Simplest in Simulink.
Hi, The Divide Blocks output should be predictable. The behavior of Simplest Rounding is documented here. If you are using fixe...

29 jours il y a | 0

A répondu
Create fi object from Simulink data type
Hi Create a numerictype object from the type name. Then create a fi object using the numerictype as the second input argument...

environ un mois il y a | 2

| A accepté

A répondu
How to implement the lu function for fixed-point data types?
Hi, Fixed-Point Designer provides several tools for solving systems of linear equations, including QR decomposition and solving...

environ un mois il y a | 0

| A accepté

A répondu
is there a way to define 'fixdt' in a Matlab script and use this variable in a Simulink User-Defined Function?
Inside the Simulink Library "User Defined Functions" section, there are about 16 different kinds of blocks. I'm guessing you are...

2 mois il y a | 1

A répondu
How to use a script to select drop-down menu options of component in Simulink?
If the entity you want to do set_param on is a block, then you can get a lot of information from DialogParameters. The followin...

3 mois il y a | 0

A répondu
what does the "percentage of occurrences along the Y-axis" mean in fixed point converter app?
Hi, The histograms in quantization workflows put each value observed in simulation in a power of two bin. For example, the val...

3 mois il y a | 0

| A accepté

A répondu
How to find the license dependency of a Simulink model?
Hi, Some products require licenses based on what Simulink modeling elements are used. Other products require licenses based on...

3 mois il y a | 0

| A accepté

A répondu
Defining an improper function in Simulink
The Laplace operator 1/s is an integrator and s is a derivative. You can break apart your equation and implement it with a gain...

3 mois il y a | 0

A répondu
FAQ: Why does Fixed-Point fi variable times MATLAB floating-point variable error out in code generation, MATLAB Function Block, etc.?
fi op float: auto convert float to fixed-point "constant" Fixed-Point Designer's fi variables are designed to prioritize ease o...

4 mois il y a | 0

| A accepté

A répondu
Generating math expression LUT using variable from workspace
I assume you are modeling your design in Simulink. I suggest you look at using the Function Approximation tooling to create an ...

4 mois il y a | 0

| A accepté

A répondu
how to create a look up table to use in simulink from a 2D array of doubles
To create a Simulink 1D Lookup Table block using the data from your 2D matrix variable, modify this script to meet your needs a...

4 mois il y a | 0

A répondu
CIC decimation output is strange (Output word length and negative fractional length)
In the documentation for CIC Decimator, take a look at the algorithm section. In that section, take a look at Gain Correction a...

4 mois il y a | 0

| A accepté

A répondu
FAQ: What's the difference between the two Simulink Precision Loss Diagnostics for Parameters and Fixed-Point Constants?
Detect precision loss diagnostic for Parameters Simulink's detect parameter precision loss diagnostic applys to run-time parame...

5 mois il y a | 0

| A accepté

A répondu
Streamlining of zeroing out last 2 bits of fixed 16 bit number?
There are 3 ways this can be achieved. As already discussed, Bitwise AND against a constant mask or shift right then shift le...

6 mois il y a | 0

| A accepté

A répondu
Why do I receive error message "This requires the Fixed-Point Designer license." for a simple matlab function?
Showing the data types on the Simulink signal lines can be very helpful when investigating. Open the model in question Then at...

6 mois il y a | 2

A répondu
Embedded Coder - difference in results between the original model and generated C code
The IEEE 754 floating-point standard RECOMMENDS that languages implement sin to have correct rounding. Correct rounding means t...

7 mois il y a | 1

| A accepté

A répondu
How to get correct embedded code generation of Lookup Table?
My hunch is that Embedded Coder has optimized away code for the specific Lookup Table Block. One form of optimization is "dead ...

8 mois il y a | 1

| A accepté

A répondu
Why not getting same constant value after converting to single from double in MATLAB 2016b simulink
The facts that John D'Errico mentioned are very good to keep in mind as you are analyzing/debugging your model. The rounding of...

9 mois il y a | 0

A répondu
how to pass(or link) ' fixed- point values' to the (root inport mapper-connect inputs) in the 'HDL inport block'
The problem is that the model is configured such that root inport is getting one data type, but the external data is using a dif...

9 mois il y a | 0

| A accepté

A répondu
Getting 'empty' Compiled Port Data Types
Set model in compile mode to access data types This may be changing, but historically at least, compiled port data types are av...

9 mois il y a | 0

A répondu
Using a look-up table for decoupling waveforms
Hi Milos, I've created a FAQ in response to your question Resolve Error Lookup Repeated Breakpoints. The FAQ includes a utilit...

10 mois il y a | 0

| A accepté

A répondu
FAQ: How can I resolve the error due to lookup table not allowing repeated breakpoints?
A solution for making the lookup tables happy is to move the repeated breakpoints a "tiny amount". A key basis for this approac...

10 mois il y a | 0

| A accepté

A répondu
Create a repeating sequence without interpolation
There are three repeating sequence blocks in Simulink. With the right choice for Lookup Method, the block Repeating...

10 mois il y a | 0

| A accepté

A répondu
Simulink start takes long time to compile
If you have not done so already, I suggest you run Simulink Performance Advisor tool on your model. The Tool knows lots of grea...

10 mois il y a | 0

A répondu
calling fi(var1, var2,..varN) in matlab function in a simulink model asks for constant values for input 2 to N
I don't know if there is or is not a way to make the MATLAB Function block recognize that W_HDISP as a constant at update diagra...

10 mois il y a | 0

A répondu
Unit Delay block is supposed to be NOT a DIRECT FEEDTHROUGH But in documentation it is said YES
The Delay Block and the Unit Delay Block are subtly complicated especially with regard to Direct Feedthrough. Whether or not Di...

10 mois il y a | 1

| A accepté

A répondu
How to remain the bits of input signal port unchanged after using fixed-point tool?
LockScale prevents changes by Fixed-Point Tool Often some signals and parameters in a model are mandated early in the design pr...

11 mois il y a | 0

| A accepté

A répondu
Is it possible to disable compiling before simulating in Simulink?
Simulink Fast Restart is exactly what you want (assuming you are not making structural changes to your model between simulations...

12 mois il y a | 2

| A accepté

Charger plus

Andy Bartlett

Statistiques

MATLAB Answers

MATLAB Answers

File Exchange

File Exchange

File Exchange

File Exchange

MATLAB Answers

MATLAB Answers

Content Feed