Réponse apportée
UAV Toolbox Support Package for PX4 Autopilots Install Failed
The error syndrome mentioned in the log looks similar to what has been mentioned here. I would recommend you to upgrade your MAT...

plus de 3 ans il y a | 0

| A accepté

Réponse apportée
THE CUBE ORANGE / PX4 SUPPORT PACKAGE TOOLBOX CONNECTION PROBLEM !!
The R2022b release of UAV Toolbox Support Package for PX4 Autopilots now provides the facility to deploy code on Cube Orange boa...

plus de 3 ans il y a | 0

Réponse apportée
UAV toolbox PX4 cube orange Compatability
The R2022b release of UAV Toolbox Support Package for PX4 Autopilots now provides the facility to deploy code on Cube Orange boa...

plus de 3 ans il y a | 0

Réponse apportée
UAV Toolbox Support Package for PX4 Autopilots - Hardware Setup Build PX4 Firmware Failed
First thing I would suggest is build the Firmware using the Cygwin Terminal in the new PC. You can run the command make px4_sitl...

plus de 3 ans il y a | 0

| A accepté

Réponse apportée
I have no idea about add on "UAV toolbox support package for px4 autopilot"
Can you send us the installation log where we can see the detailed log. To get the installation log Open MATLAB where you t...

presque 4 ans il y a | 0

Réponse apportée
UAV toolbox support package for PX4 : local position estimation problem
We recommend looking into the PX4 EKF2 estimator code to evaluate why you are seeing the tight coupling between GPS and estimate...

presque 4 ans il y a | 0

| A accepté

Réponse apportée
PX4 Attitude Control
Enusre that you are receiving valid quaternion data from the block i.e in the quaternion (q1, q2, q3, q4) q1 != 0. The block can...

presque 4 ans il y a | 1

Réponse apportée
i want to turn on the motors using Simulink
Are you using the safety switch to arm the motors in your PX4 Autopilot?

presque 4 ans il y a | 0

Réponse apportée
External Mode Open Protocol Connect command failed
Hi, As per the official documentation, the port named "Serial 4" exists only on Pixhawk 1 and not on Pixhwak 4. The example ill...

presque 4 ans il y a | 0

| A accepté

Réponse apportée
UAV toolbox with PX4: Error encountered when trying to log in SD card
Your Simulink model name "My file name" contains spaces. Can you try removing the space from your model name and then try?

presque 4 ans il y a | 0

| A accepté

Réponse apportée
Is "conditionally" executing px4_simulink_app possible?
Jongwon Lee, This is what I have understood of your requirements. Please correct me if I missed anything You would like to swi...

environ 4 ans il y a | 0

| A accepté

Réponse apportée
How to read serial data from external sensor using pixhawk cube?
Alex, We provided you details about your issue when you reached out to Tech Support about this. Hope that solved your problem....

environ 4 ans il y a | 0

Réponse apportée
Can't get GPS readings from Pixhawk 4 mini in "Reading GPS Data from PX4 Autopilot" Example
I suggest you use the default Pixhawk rcS as the startup script to do that. We support this in R2021b. Follow the documentation...

environ 4 ans il y a | 1

Réponse apportée
MATLAB Simulink-Hardware support for PX4 autopilot UAV
This issue is mostly due to two different COM ports coming uo for your Pixhawk board (one for upload and one for communication)....

environ 4 ans il y a | 2

Réponse apportée
Some question about UAV Toolbox PX4 support package
The Navigation option enables all the modules in rcS. So you can interact with all the available PX4 modules and design your cus...

environ 4 ans il y a | 0

| A accepté

Réponse apportée
Can the UAV Toolbox Support Package for PX4 Autopilots be used with px4 SITL?
The UAV Toolbox Support Package for PX4 Autopilots supports PX4 SITL. See below MATLAB documentations and examples Deployment a...

plus de 4 ans il y a | 0

Réponse apportée
The output value of discrete PID controller is NaN
Answered the same question here https://www.mathworks.com/matlabcentral/answers/527384-i-gain-of-pid-controller-has-nan-value...

plus de 4 ans il y a | 2

Réponse apportée
i gain of PID controller has nan value.(simulink)
This can be happening if for an initial brief period of time, any one of the inputs to PID was NaN. Even though the input values...

plus de 4 ans il y a | 0

Réponse apportée
How to enable commander and navigator modules in uav toolbox
Till R2021a, we provide the custom startup script to disable commander and navigator modules to avoid potential interference of ...

plus de 4 ans il y a | 0

| A accepté

Réponse apportée
MATLAB hardware interface issue
You are facing a common issue with Bootloader COM Port and Communication COM port being different for some Pixhawk 2.1 boards. P...

plus de 4 ans il y a | 0

Réponse apportée
THE CUBE ORANGE / PX4 SUPPORT PACKAGE TOOLBOX CONNECTION PROBLEM !!
Hello, Looks like you are facing a standard problem with Cube family of boards that come with 2 different COM ports for bootloa...

plus de 4 ans il y a | 0

Réponse apportée
How do I get the support package installation log?
The support package installation details are logged in a file in the temp directory in your computer. You can fetch the file as ...

plus de 4 ans il y a | 1

| A accepté

Question

How do I get the support package installation log?
I am unable to install the support packages on my MATLAB. The installation errors out with the error "Contact Technical Support"...

plus de 4 ans il y a | 2 réponses | 0

2

réponses

Réponse apportée
Example Px4DemoHostTargetWithSimulinkPlantStart failing during Monitor and Tune
Siddharth, Juan, Can you confirm if you have Simulink Coder, Embedded Coder installed?

plus de 4 ans il y a | 0

Réponse apportée
Simulink Pixhawk Support Package System Requirements
You need below mentioned minimum products to work with UAV Toolbox Support Package for PX4 Autopilots UAV Toolbox MATLAB Simu...

environ 5 ans il y a | 0

Réponse apportée
how can i recieve Mavlink message through udp connection?
Hi, I can see the Status outport of the Deserializer block is 0 which indicates that no new message is being received. I also s...

environ 5 ans il y a | 0

| A accepté

Réponse apportée
error and warning with jMAVSim in 'px4demo_PositionController_quadroptor'
The issue should be resolved with the PX4 Firmware support for v1.10.2 in R2020b. I recommend that you update the MATLAB to R202...

plus de 5 ans il y a | 0

Réponse apportée
Error message 'Error occurred while executing External Mode MEX-file 'ext_comm':'
The issue has been fixed in R2020b. I suggest you upgrade MATLAB to R2020b

plus de 5 ans il y a | 0

Réponse apportée
warning : Parameter Value cannot be downloaded because its type...
Hi, The warning is a harmless warning that comes when you try to tune a variable in a bus in SImulink. The tuning will take eff...

plus de 5 ans il y a | 0

Réponse apportée
px4 toolchain installation not verified by Matlab's configuration 2020b
Hello Juan Tapiero Bernal, Looks like something is wrong with your Cygwin installation. Did you try uninstalling the toolchain ...

plus de 5 ans il y a | 0

| A accepté