Delay input physical signal by variable time
The PS Variable Delay block generates the output physical signal, y, by delaying the input physical signal, u:
y = u ( t – τ )
where τ is the delay time, which can vary throughout the simulation. You supply the delay time as a signal through the input port T.
For the initial time interval, when t <= StartTime + τ, the block outputs the value of the signal supplied through the input port H.
The block has the following ports:
Physical signal input port for the original signal.
Physical signal input port that supplies the delay time.
Physical signal input port that supplies the output signal for the initial time interval, when time since the start of simulation is less than or equal to the delay time.
Physical signal output port for the delayed signal.