Generate sawtooth waveform at regular intervals
Control and Measurements/Pulse & Signal Generators
The Sawtooth Generator block generates a sawtooth waveform, with peak amplitude of +/−1, at regular intervals. The figure shows how the Frequency and Phase block parameters affect the output waveform.
Specify the frequency of the sawtooth waveform, in hertz.
Specify the delay of the sawtooth waveform, in degrees. When the phase is set to 0, the waveform starts with an amplitude of −1 and a positive slope.
Specify the sample time of the block, in seconds. Set to 0 to implement a continuous block.
|Sample Time||Specified in the Sample Time parameter|
Continuous if Sample Time = 0