Vehicle Network Toolbox™ supports PEAK-System CAN interface hardware using the latest version of the PCAN basic library. The table below lists the hardware supported by the latest release of Vehicle Network Toolbox.
With PEAK-System CAN interface support, you can perform the following tasks in MATLAB® or Simulink®:
- Transmit and receive CAN and XCP messages
- Pack and unpack CAN messages for simplified decoding and encoding
- Filter, log, and replay CAN messages
- Use .dbc database and A2L description files
- Find and display CAN interface device settings
In MATLAB and Simulink, you can transmit and receive CAN messages using the CAN FD standard if the CAN interface hardware supports CAN FD. Vehicle Network Toolbox supports PEAK-System CAN interface hardware on Windows and Linux platforms.
The support package downloadable from this page is for Windows only. PEAK-System hardware can also be used from MATLAB on Linux platform. To use PEAK-System hardware on Linux platform, you must install the Linux drivers manually from the PEAK-System web site.
If you do not see your specific hardware device listed below, please click the Request Hardware Support button at the bottom of the page. For detailed information about a board listed here, visit the PEAK-System web site.
|Bus/Form Factor||Product Name|
|PC Card||PCAN-PC Card|
|PCI Express||PCAN-PCI Express|
|PCAN-PCI Express FD|
|PCI Express Mini||PCAN-miniPCIe|
|PCAN USB FD|
|PCAN-USB Pro (LIN not supported)|
|PCAN USB Pro FD (LIN not supported)|
Platform and Release Support
See the hardware support package system requirements table for current and prior version, release, and platform availability.